face-unlock: rename from plasma-face-unlock

face-unlock/.SRCINFO

@@ -0,0 +1,39 @@
+pkgbase = plasma-face-unlock
+	pkgdesc = Face ID for KDE Plasma: the lock screen, sudo and admin prompts by face, with a photo check
+	pkgver = 1.0.1
+	pkgrel = 1
+	url = https://github.com/LoonixTools/plasma-face-unlock
+	install = plasma-face-unlock.install
+	arch = x86_64
+	arch = aarch64
+	license = GPL-3.0-or-later
+	license = MIT
+	license = Apache-2.0
+	makedepends = cmake
+	makedepends = scdoc
+	depends = bash
+	depends = coreutils
+	depends = gawk
+	depends = grep
+	depends = sed
+	depends = gettext
+	depends = systemd
+	depends = systemd-libs
+	depends = pam
+	depends = polkit
+	depends = opencv
+	depends = qt6-base
+	depends = qt6-declarative
+	depends = layer-shell-qt
+	depends = ki18n
+	depends = kscreenlocker
+	noextract = face_detection_yunet_2023mar.onnx
+	noextract = face_recognition_sface_2021dec.onnx
+	source = plasma-face-unlock-1.0.1.tar.gz::https://github.com/LoonixTools/plasma-face-unlock/archive/refs/tags/v1.0.1.tar.gz
+	source = face_detection_yunet_2023mar.onnx::https://github.com/opencv/opencv_zoo/raw/main/models/face_detection_yunet/face_detection_yunet_2023mar.onnx
+	source = face_recognition_sface_2021dec.onnx::https://github.com/opencv/opencv_zoo/raw/main/models/face_recognition_sface/face_recognition_sface_2021dec.onnx
+	sha256sums = 30bd9e5d76f93f4e196e2eae76d1185370cb51fc9d9954355a42779cd8f60d15
+	sha256sums = 8f2383e4dd3cfbb4553ea8718107fc0423210dc964f9f4280604804ed2552fa4
+	sha256sums = 0ba9fbfa01b5270c96627c4ef784da859931e02f04419c829e83484087c34e79
+
+pkgname = plasma-face-unlock

face-unlock/PKGBUILD

@@ -0,0 +1,33 @@
+# Maintainer: Felitendo
+# This PKGBUILD is updated automatically:
+# https://github.com/Felitendo/PKGBUILDS
+
+pkgname=plasma-face-unlock
+pkgver=1.0.1
+pkgrel=1
+pkgdesc="Face ID for KDE Plasma: the lock screen, sudo and admin prompts by face, with a photo check"
+arch=('x86_64' 'aarch64')
+url="https://github.com/LoonixTools/plasma-face-unlock"
+license=('GPL-3.0-or-later' 'MIT' 'Apache-2.0')
+depends=('bash' 'coreutils' 'gawk' 'grep' 'sed' 'gettext' 'systemd' 'systemd-libs' 'pam' 'polkit'
+         'opencv' 'qt6-base' 'qt6-declarative' 'layer-shell-qt' 'ki18n' 'kscreenlocker')
+makedepends=('cmake' 'scdoc')
+install="${pkgname}.install"
+# The two face networks come from the OpenCV model zoo, pinned by checksum.
+source=("${pkgname}-${pkgver}.tar.gz::${url}/archive/refs/tags/v${pkgver}.tar.gz"
+        "face_detection_yunet_2023mar.onnx::https://github.com/opencv/opencv_zoo/raw/main/models/face_detection_yunet/face_detection_yunet_2023mar.onnx"
+        "face_recognition_sface_2021dec.onnx::https://github.com/opencv/opencv_zoo/raw/main/models/face_recognition_sface/face_recognition_sface_2021dec.onnx")
+noextract=('face_detection_yunet_2023mar.onnx' 'face_recognition_sface_2021dec.onnx')
+sha256sums=('30bd9e5d76f93f4e196e2eae76d1185370cb51fc9d9954355a42779cd8f60d15' '8f2383e4dd3cfbb4553ea8718107fc0423210dc964f9f4280604804ed2552fa4' '0ba9fbfa01b5270c96627c4ef784da859931e02f04419c829e83484087c34e79')
+
+build() {
+  make -C "${pkgname}-${pkgver}" VERSION="$pkgver"
+}
+
+check() {
+  make -C "${pkgname}-${pkgver}" VERSION="$pkgver" test
+}
+
+package() {
+  make -C "${pkgname}-${pkgver}" VERSION="$pkgver" MODELS_SRC="$srcdir" DESTDIR="$pkgdir" install
+}

face-unlock/face-unlock.install

@@ -0,0 +1,29 @@
+post_install() {
+  cat <<'MSG'
+
+  plasma-face-unlock is installed but not active yet.
+
+    plasma-face-unlock          interactive menu
+    plasma-face-unlock enable   set up your face and turn it on
+
+  Run it as your own user, not with sudo. It asks for your password when it
+  needs to, and sudo and admin prompts stay with the password until you switch
+  them on under Settings.
+
+MSG
+}
+
+pre_remove() {
+  cat <<'MSG'
+
+  Before removing this package, run
+
+    plasma-face-unlock disable
+
+  as each user that turned it on. That takes face unlock back out of sudo and
+  polkit. (Removing it without that is safe too: the PAM line is written so
+  that a missing module is skipped, and sudo keeps asking for the password.)
+
+MSG
+  systemctl disable --now plasma-face-unlockd.socket plasma-face-unlockd.service >/dev/null 2>&1 || true
+}

face-unlock/pkg.sh

@@ -0,0 +1,29 @@
+# plasma-face-unlock - Face ID for KDE Plasma
+# (https://github.com/LoonixTools/plasma-face-unlock).
+#
+# Built from the release tarball with the upstream Makefile (CMake for the
+# daemon, the agent and the PAM module). The two face networks are sources of
+# their own from the OpenCV model zoo with fixed checksums, so a release only
+# changes the tarball's.
+
+UPSTREAM_REPO="LoonixTools/plasma-face-unlock"
+
+# Installed in CI (pacman) before the makepkg test build, which skips the
+# dependency check. check() runs the upstream tests and needs nothing more.
+BUILD_DEPS=(cmake scdoc gettext opencv qt6-base qt6-declarative layer-shell-qt ki18n pam systemd-libs)
+
+latest_version() {
+  curl -sf "https://api.github.com/repos/$UPSTREAM_REPO/releases/latest" \
+    | jq -r '.tag_name' | sed 's/^v//'
+}
+
+# refresh_checksums <version> <pkgbuild-path>
+refresh_checksums() {
+  local ver="$1" pkgbuild="$2"
+  local sha
+  sha="$(curl -sfL \
+    "https://github.com/$UPSTREAM_REPO/archive/refs/tags/v$ver.tar.gz" \
+    | sha256sum | cut -d' ' -f1)"
+  # Only the first sum is the tarball's; the models' stay.
+  sed -i -E "s|^sha256sums=\('[^']*'|sha256sums=('$sha'|" "$pkgbuild"
+}