Trim the package cache by default, and split it from orphan removal

CleanCache was off, so nothing ever pruned /var/cache/pacman/pkg - 23 GB on the
machine this was found on, with three 3.2 GB copies of one package. Trimming
only drops older versions of installed packages and cached versions of
uninstalled ones, so the cost is downgrade depth, not working software.

flatpak uninstall --unused moves from CleanCache to RemoveOrphans, where it
belongs: unused runtimes are the Flatpak equivalent of orphaned packages, and
removing installed software should not hide behind a flag named for cache
trimming. RemoveOrphans stays off - 'orphaned' only means nothing depends on
it, which is also true of something installed deliberately.

The log now reports what a trim reclaimed, since a real paccache run says
almost nothing and there was otherwise no way to tell it was working.

Makefile

@@ -8,7 +8,7 @@
 # Overridable so a packager can pass the version it is actually building
 # (`make VERSION=$pkgver`). The literal below is the fallback for builds
 # straight from a checkout, and is what a release tag has to carry.
-VERSION      ?= 1.0.5
+VERSION      ?= 1.0.7
 
 PREFIX       ?= /usr
 DESTDIR      ?=

README.md

@@ -55,8 +55,15 @@ business rebuilding somebody's system before being asked.
 | Flatpak | system and per-user installations |
 | AppImages | via [Gear Lever](https://github.com/mijorus/gearlever), if installed |
 
-`-git`/`-devel` AUR packages, cache trimming and orphan removal exist as
-options but are off by default.
+It also trims the pacman package cache after each run (`paccache`, keeping the
+3 most recent versions), because otherwise `/var/cache/pacman/pkg` grows
+forever — tens of gigabytes on a machine with a few large packages. Set
+`KeepOldPackages=1` if disk space matters more than the ability to downgrade.
+
+`-git`/`-devel` AUR packages and orphan removal exist as options but are off by
+default. Orphan removal deletes installed software, and "orphaned" only means
+nothing else depends on it — which is also true of something installed
+deliberately.
 
 ## When it holds back
 

po/cachy-auto-update.pot

@@ -254,3 +254,6 @@ msgstr ""
 #, c-format
 msgid "Held back: %s"
 msgstr ""
+
+msgid "The last run was stopped before it finished."
+msgstr ""

po/de.po

@@ -255,3 +255,6 @@ msgstr "%s konnte nicht aktualisiert werden und wurde übersprungen. Alles ander
 #, c-format
 msgid "Held back: %s"
 msgstr "Zurückgehalten: %s"
+
+msgid "The last run was stopped before it finished."
+msgstr "Der letzte Lauf wurde abgebrochen, bevor er fertig war."

res/config/cachy-auto-update.conf

@@ -66,16 +66,29 @@ AutoResolveConflicts=yes
 IgnorePkg=
 
 # ---------------------------------------------------------------------------
-# Housekeeping - all off by default
+# Housekeeping
 # ---------------------------------------------------------------------------
 
-# Trim the pacman package cache after an update.
-CleanCache=no
+# Trim the pacman package cache after an update: drop the older versions of
+# installed packages, and every cached version of packages that are no longer
+# installed. Nothing that is currently installed is ever touched, so this only
+# costs the ability to downgrade further back than KeepOldPackages.
+# Without it /var/cache/pacman/pkg grows forever - tens of gigabytes on a
+# machine with a few large packages.
+CleanCache=yes
 
-# How many old versions per package to keep when CleanCache is on.
+# How many old versions per package to keep when CleanCache is on. 3 is the
+# Arch default and leaves room to downgrade. Set it to 1 if disk space matters
+# more than that; on a machine with a handful of multi-gigabyte packages the
+# difference is easily ten gigabytes.
 KeepOldPackages=3
 
-# Remove packages that were installed as dependencies and are no longer needed.
+# Remove packages nothing depends on any more: pacman packages that were pulled
+# in as dependencies and are now unreferenced, plus Flatpak runtimes no
+# installed application uses.
+# Off by default, and unlike CleanCache this one deletes installed software:
+# "orphaned" only means no other package requires it, which is also true of
+# something installed deliberately as a dependency of nothing.
 RemoveOrphans=no
 
 # ---------------------------------------------------------------------------

src/cachy-auto-update-run

@@ -63,6 +63,21 @@ fi
 cau_config_load
 cau_log_open
 
+# Record an interruption rather than leaving the previous run's verdict behind.
+# Without this, killing an interactive run leaves last_result at whatever it was
+# before - so the menu can keep reporting a problem from hours ago while the
+# machine is in fact fully up to date, which is worse than saying nothing.
+# pacman makes the commit phase itself uninterruptible, so the packages either
+# all landed or none did; only our own bookkeeping is at risk here.
+_cau_interrupted() {
+	cau_error "Update run interrupted ($1)"
+	cau_state_write last_result interrupted
+	exit 130
+}
+trap '_cau_interrupted SIGINT'  INT
+trap '_cau_interrupted SIGTERM' TERM
+trap '_cau_interrupted SIGHUP'  HUP
+
 # ---------------------------------------------------------------------------
 # Should this run happen at all?
 # ---------------------------------------------------------------------------

src/lib/common.sh

@@ -91,7 +91,14 @@ cau_msg_in() {
 # Output and logging
 # ---------------------------------------------------------------------------
 
-if [[ -t 1 && -z ${NO_COLOR:-} ]]; then
+# Is a person watching? Decided once, here, while stdout is still whatever the
+# process was started with. Testing `-t 1` at the point of use is unreliable:
+# any function called through $(...) or <(...) sees a pipe on stdout and would
+# conclude nobody is there.
+CAU_INTERACTIVE=''
+[[ -t 1 ]] && CAU_INTERACTIVE=1
+
+if [[ -n $CAU_INTERACTIVE && -z ${NO_COLOR:-} ]]; then
 	CAU_C_RESET=$'\033[0m'
 	CAU_C_BOLD=$'\033[1m'
 	CAU_C_DIM=$'\033[2m'
@@ -132,10 +139,19 @@ cau_log_open() {
 	CAU_LOG_OPEN=1
 }
 
-# Runs a command, streaming its combined output into the run log. Returns the
+# Runs a command, capturing its combined output in the run log. Returns the
 # command's exit status.
+#
+# When a person is watching - `cachy-auto-update run` from a terminal - the
+# output is shown as well. Building an AUR package or pulling a few hundred
+# megabytes of Flatpak can take minutes, and silence for that long is
+# indistinguishable from a hang.
 cau_run_logged() {
 	if [[ -n ${CAU_LOG_OPEN:-} ]]; then
+		if [[ -n $CAU_INTERACTIVE ]]; then
+			"$@" 2>&1 | tee -a "$CAU_RUNLOG"
+			return "${PIPESTATUS[0]}"
+		fi
 		"$@" >> "$CAU_RUNLOG" 2>&1
 	else
 		"$@" >&2

src/lib/config.sh

@@ -96,7 +96,7 @@ cau_config_load() {
 	CFG_APPIMAGE=no;              cau_config_bool UpdateAppImages      yes && CFG_APPIMAGE=yes
 	CFG_DEVEL=no;                 cau_config_bool UpdateDevel          no  && CFG_DEVEL=yes
 	CFG_RESOLVE_CONFLICTS=no;     cau_config_bool AutoResolveConflicts yes && CFG_RESOLVE_CONFLICTS=yes
-	CFG_CLEAN_CACHE=no;           cau_config_bool CleanCache           no  && CFG_CLEAN_CACHE=yes
+	CFG_CLEAN_CACHE=no;           cau_config_bool CleanCache           yes && CFG_CLEAN_CACHE=yes
 	CFG_REMOVE_ORPHANS=no;        cau_config_bool RemoveOrphans        no  && CFG_REMOVE_ORPHANS=yes
 	CFG_NOTIFY_SUCCESS=no;        cau_config_bool NotifyOnSuccess      yes && CFG_NOTIFY_SUCCESS=yes
 	CFG_NOTIFY_ERROR=no;          cau_config_bool NotifyOnError        yes && CFG_NOTIFY_ERROR=yes

src/lib/menu.sh

@@ -81,6 +81,10 @@ cau_ui_status() {
 		printf '\n  %s%s%s\n' "$CAU_C_YELLOW" \
 			"$(cau_msg "The last run reported a problem - see 'cachy-auto-update log'.")" \
 			"$CAU_C_RESET"
+	elif [[ $result == interrupted ]]; then
+		printf '\n  %s%s%s\n' "$CAU_C_YELLOW" \
+			"$(cau_msg "The last run was stopped before it finished.")" \
+			"$CAU_C_RESET"
 	fi
 	if [[ $reboot == 1 ]]; then
 		printf '\n  %s%s%s\n' "$CAU_C_YELLOW" \

src/lib/pkg_flatpak.sh

@@ -63,7 +63,10 @@ cau_flatpak_update() {
 		fi
 	done < <(cau_human_users)
 
-	if [[ $CFG_CLEAN_CACHE == yes ]]; then
+	# Unused runtimes are the Flatpak equivalent of orphaned packages - this is
+	# removal of installed software, not cache trimming, so it belongs behind
+	# RemoveOrphans rather than CleanCache.
+	if [[ $CFG_REMOVE_ORPHANS == yes ]]; then
 		cau_run_logged flatpak uninstall --system --unused --noninteractive --assumeyes || true
 	fi
 

src/lib/pkg_pacman.sh

@@ -15,13 +15,35 @@ CAU_PACMAN_HELD=''
 
 # Base flags for every unattended pacman invocation.
 cau_pacman_flags() {
-	printf '%s\n' --noconfirm --color never --noprogressbar --disable-download-timeout
+	printf '%s\n' --noconfirm --color never --disable-download-timeout
+
+	# A progress bar is worth having when somebody is watching a `run` from a
+	# terminal; in the timer's log it is only carriage-return noise.
+	[[ -n $CAU_INTERACTIVE ]] || printf '%s\n' --noprogressbar
+
 	local pkg
 	for pkg in $CFG_IGNORE_PKG; do
 		printf '%s\n' --ignore "$pkg"
 	done
 }
 
+# _cau_pacman_exec <logfile> <pacman args...>
+# Captures pacman's output for classification, and streams it as well when a
+# person is watching. Upgrading a few hundred packages takes minutes; without
+# this an interactive run shows one line and then nothing at all, which is
+# indistinguishable from a hang and invites someone to kill it mid-transaction.
+_cau_pacman_exec() {
+	local log="$1"
+	shift
+
+	if [[ -n $CAU_INTERACTIVE ]]; then
+		pacman "$@" 2>&1 | tee "$log"
+		return "${PIPESTATUS[0]}"
+	fi
+
+	pacman "$@" > "$log" 2>&1
+}
+
 # cau_pacman_pending
 # Fills CAU_PACMAN_PENDING and returns 1 when there is nothing to do.
 cau_pacman_pending() {
@@ -121,7 +143,7 @@ cau_pacman_update() {
 	local attempt=0 b
 
 	while true; do
-		if pacman -Syu "${flags[@]}" "${extra[@]}" > "$log" 2>&1; then
+		if _cau_pacman_exec "$log" -Syu "${flags[@]}" "${extra[@]}"; then
 			cat "$log" >> "$CAU_RUNLOG" 2>/dev/null
 			grep -E '^(removing|replacing) ' "$log" 2>/dev/null \
 				| while read -r line; do cau_info "  $line"; done
@@ -232,7 +254,14 @@ cau_pacman_cleanup() {
 	fi
 
 	if [[ $CFG_CLEAN_CACHE == yes ]] && cau_have paccache; then
-		cau_info "Trimming the package cache"
+		# paccache's dry run reports what a real run would reclaim; logging it
+		# first is the only way to tell afterwards whether trimming is doing
+		# anything, since the real run says little.
+		local reclaim
+		reclaim="$( { paccache -d --nocolor -k"$CFG_KEEP_OLD"; paccache -du --nocolor -k0; } 2>&1 \
+			| grep -oE 'disk space saved: [^)]*' | paste -sd', ' -)"
+
+		cau_info "Trimming the package cache (keeping $CFG_KEEP_OLD old version(s))${reclaim:+ - $reclaim}"
 		cau_run_logged paccache -r --nocolor -k"$CFG_KEEP_OLD"  || cau_warn "paccache -r failed"
 		cau_run_logged paccache -ru --nocolor -k0               || cau_warn "paccache -ru failed"
 	fi