feat: ask which lock screen to use on hyprland and niri

This commit is contained in:
Felitendo committed 2026-09-26 19:37:06 +02:00
1 parent 5699158bb1
commit 1da82f21fc
34 files changed
+5319 -1609

No files matched your search

+246 -113
View File
@@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: face-unlock 1.0.1\n"
"Report-Msgid-Bugs-To: https://github.com/LoonixTools/face-unlock/issues\n"
"POT-Creation-Date: 2026-09-26 19:35+0200\n"
"POT-Creation-Date: 2026-09-26 19:36+0200\n"
"PO-Revision-Date: 2026-09-24 12:00+0200\n"
"Last-Translator: Felitendo\n"
"Language-Team: Chinese (simplified)\n"
@@ -53,8 +53,9 @@ msgstr "没有添加人脸。"
msgid "First, set up your face."
msgstr "请先设置你的人脸。"
#: src/face-unlock:100 src/face-unlock:139 src/lib/menu.sh:500
#: src/lib/menu.sh:504 src/lib/menu.sh:510 src/lib/menu.sh:512
#: src/face-unlock:100 src/face-unlock:145 src/lib/menu.sh:517
#: src/lib/menu.sh:521 src/lib/menu.sh:527 src/lib/menu.sh:529
#: src/lib/system.sh:290 src/lib/system.sh:296
msgid "Could not save the setting."
msgstr "无法保存设置。"
@@ -74,7 +75,15 @@ msgstr "无法启用显示气泡的 GNOME 扩展。"
msgid "Log out and back in once: then GNOME shows the bubble too."
msgstr "请注销并重新登录一次:之后 GNOME 也会显示气泡。"
#: src/face-unlock:129
#: src/face-unlock:131
msgid "Pick your lock screen in the window."
msgstr "请在窗口中选择锁屏。"
#: src/face-unlock:132
msgid "No lock screen picked. You can do it later under Settings."
msgstr "未选择锁屏。之后可以在设置中选择。"
#: src/face-unlock:135
#, sh-printf-format
msgid ""
"The lock screen (%s) takes your face too. If it does not scan when you come "
@@ -82,139 +91,139 @@ msgid ""
msgstr ""
"锁屏(%s)也接受你的人脸。如果你回来时它没有扫描,请在空的密码框中按 Enter。"
#: src/face-unlock:132
#: src/face-unlock:138
msgid "Face unlock is on. Lock the screen and look at it to try."
msgstr "人脸解锁已开启。锁定屏幕并看着它来试试。"
#: src/face-unlock:134
#: src/face-unlock:140
msgid "It can do sudo and admin prompts too. See Settings."
msgstr "它也可以用于 sudo 和管理员授权。见“设置”。"
#: src/face-unlock:150
#: src/face-unlock:156
msgid "Face unlock is off. Your faces are kept; delete them under Faces."
msgstr "人脸解锁已关闭。你的人脸会保留;可在“人脸”中删除。"
#: src/face-unlock:164 src/lib/daemon.sh:109
#: src/face-unlock:170 src/lib/daemon.sh:109
msgid "No face is set up yet."
msgstr "尚未设置任何人脸。"
#: src/face-unlock:168 src/lib/menu.sh:180 src/lib/menu.sh:664
#: src/face-unlock:174 src/lib/menu.sh:180 src/lib/menu.sh:685
msgid "on"
msgstr "开"
#: src/face-unlock:168 src/lib/menu.sh:182 src/lib/menu.sh:192
#: src/lib/menu.sh:665
#: src/face-unlock:174 src/lib/menu.sh:182 src/lib/menu.sh:192
#: src/lib/menu.sh:686
msgid "off"
msgstr "关"
#: src/face-unlock:170 src/lib/menu.sh:682
#: src/face-unlock:176 src/lib/menu.sh:703
#, sh-printf-format
msgid "%s samples, %s learned"
msgstr "%s 个样本,已学习 %s 个"
#: src/face-unlock:176
#: src/face-unlock:182
#, sh-printf-format
msgid "Which face? See `%s faces` for the ids."
msgstr "哪张人脸?用 `%s faces` 查看 ID。"
#: src/face-unlock:180
#: src/face-unlock:186
msgid "Deleted."
msgstr "已删除。"
#: src/face-unlock:191
#: src/face-unlock:197
msgid "Usage: face-unlock [command]"
msgstr "用法:face-unlock [命令]"
#: src/face-unlock:193
#: src/face-unlock:199
msgid "Commands:"
msgstr "命令:"
#: src/face-unlock:194
#: src/face-unlock:200
msgid "Turn face unlock on"
msgstr "开启人脸解锁"
#: src/face-unlock:195
#: src/face-unlock:201
msgid "Turn it off (faces are kept)"
msgstr "关闭(保留人脸)"
#: src/face-unlock:196 src/lib/menu.sh:748
#: src/face-unlock:202 src/lib/menu.sh:769
msgid "Add a face"
msgstr "添加人脸"
#: src/face-unlock:197
#: src/face-unlock:203
msgid "List the faces"
msgstr "列出人脸"
#: src/face-unlock:198
#: src/face-unlock:204
msgid "Delete a face"
msgstr "删除人脸"
#: src/face-unlock:199
#: src/face-unlock:205
msgid "Look at the camera and see what it sees"
msgstr "看着摄像头,查看它看到的画面"
#: src/face-unlock:200
#: src/face-unlock:206
msgid "Lock the screen"
msgstr "锁定屏幕"
#: src/face-unlock:201
#: src/face-unlock:207
msgid "Show what is on"
msgstr "显示已开启的功能"
#: src/face-unlock:202
#: src/face-unlock:208
msgid "Show this help"
msgstr "显示此帮助"
#: src/face-unlock:203
#: src/face-unlock:209
msgid "Show the version"
msgstr "显示版本"
#: src/face-unlock:205
#: src/face-unlock:211
msgid "Without a command an interactive menu is shown."
msgstr "不带命令时显示交互式菜单。"
#: src/face-unlock:224
#: src/face-unlock:230
msgid ""
"Run this as your own user, not as root. It asks for your password when it "
"needs to."
msgstr "请以你自己的用户运行,不要用 root。需要时会询问你的密码。"
#: src/face-unlock:247 src/lib/system.sh:101
#: src/face-unlock:253 src/lib/system.sh:101
#, sh-printf-format
msgid "Unknown command: %s"
msgstr "未知命令:%s"
#: src/lib/common.sh:171
#: src/lib/common.sh:173
msgid "never"
msgstr "从未"
#: src/lib/common.sh:181
#: src/lib/common.sh:183
msgid "just now"
msgstr "刚刚"
#: src/lib/common.sh:183
#: src/lib/common.sh:185
msgid "1 minute ago"
msgstr "1 分钟前"
#: src/lib/common.sh:186
#: src/lib/common.sh:188
#, sh-printf-format
msgid "%d minutes ago"
msgstr "%d 分钟前"
#: src/lib/common.sh:188
#: src/lib/common.sh:190
msgid "1 hour ago"
msgstr "1 小时前"
#: src/lib/common.sh:191
#: src/lib/common.sh:193
#, sh-printf-format
msgid "%d hours ago"
msgstr "%d 小时前"
#: src/lib/common.sh:193
#: src/lib/common.sh:195
msgid "1 day ago"
msgstr "1 天前"
#: src/lib/common.sh:196
#: src/lib/common.sh:198
#, sh-printf-format
msgid "%d days ago"
msgstr "%d 天前"
@@ -252,7 +261,7 @@ msgstr "尝试次数过多,人脸解锁已暂停。请用密码解锁一次。
msgid "The camera could not be used."
msgstr "无法使用摄像头。"
#: src/lib/daemon.sh:111 src/lib/menu.sh:265
#: src/lib/daemon.sh:111 src/lib/menu.sh:267
msgid "The recognition models are missing. Reinstall the package."
msgstr "缺少识别模型。请重新安装软件包。"
@@ -354,11 +363,11 @@ msgstr "尝试次数过多。人脸解锁已暂停,直到你用密码解锁。
msgid "[y/N]"
msgstr "[y/N]"
#: src/lib/menu.sh:172 src/lib/menu.sh:566
#: src/lib/menu.sh:172 src/lib/menu.sh:583
msgid "ON"
msgstr "开启"
#: src/lib/menu.sh:174 src/lib/menu.sh:567
#: src/lib/menu.sh:174 src/lib/menu.sh:584
msgid "OFF"
msgstr "关闭"
@@ -399,92 +408,100 @@ msgstr "慢"
msgid "%s seconds"
msgstr "%s 秒"
#: src/lib/menu.sh:202 src/lib/menu.sh:447
#: src/lib/menu.sh:202 src/lib/menu.sh:452
msgid "automatic"
msgstr "自动"
#: src/lib/menu.sh:219
#: src/lib/menu.sh:203
msgid "face-unlock's"
msgstr "face-unlock 的"
#: src/lib/menu.sh:204
msgid "yours"
msgstr "你自己的"
#: src/lib/menu.sh:221
msgid "Face unlock"
msgstr "人脸解锁"
#: src/lib/menu.sh:223
#: src/lib/menu.sh:225
msgid "Service"
msgstr "服务"
#: src/lib/menu.sh:223
#: src/lib/menu.sh:225
msgid "not running"
msgstr "未运行"
#: src/lib/menu.sh:225
#: src/lib/menu.sh:227
msgid "Turning face unlock on again starts it."
msgstr "重新开启人脸解锁即可启动它。"
#: src/lib/menu.sh:236 src/lib/menu.sh:238 src/lib/menu.sh:660
#: src/lib/menu.sh:749
#: src/lib/menu.sh:238 src/lib/menu.sh:240 src/lib/menu.sh:681
#: src/lib/menu.sh:770
msgid "Faces"
msgstr "人脸"
#: src/lib/menu.sh:236
#: src/lib/menu.sh:238
msgid "none set up yet"
msgstr "尚未设置"
#: src/lib/menu.sh:238
#: src/lib/menu.sh:240
msgid "all turned off"
msgstr "全部关闭"
#: src/lib/menu.sh:244
#: src/lib/menu.sh:246
msgid "none found"
msgstr "未找到"
#: src/lib/menu.sh:246 src/lib/menu.sh
#: src/lib/menu.sh:248 src/lib/menu.sh
msgid "Camera"
msgstr "摄像头"
#: src/lib/menu.sh:248 src/lib/menu.sh
#: src/lib/menu.sh:250 src/lib/menu.sh
msgid "Lock screen"
msgstr "锁屏"
#: src/lib/menu.sh:252
#: src/lib/menu.sh:254
msgid "sudo"
msgstr "sudo"
#: src/lib/menu.sh:253 src/lib/menu.sh
#: src/lib/menu.sh:255 src/lib/menu.sh
msgid "Admin prompts"
msgstr "管理员授权"
#: src/lib/menu.sh:255 src/lib/menu.sh
#: src/lib/menu.sh:257 src/lib/menu.sh
msgid "Lock screens"
msgstr "锁屏"
#: src/lib/menu.sh:257 src/lib/menu.sh
#: src/lib/menu.sh:259 src/lib/menu.sh
msgid "Photo check"
msgstr "照片检测"
#: src/lib/menu.sh:260
#: src/lib/menu.sh:262
msgid "Paused"
msgstr "已暂停"
#: src/lib/menu.sh:260
#: src/lib/menu.sh:262
#, sh-printf-format
msgid "for %d more minutes, or until the password is used"
msgstr "还有 %d 分钟,或直到使用密码"
#: src/lib/menu.sh:262
#: src/lib/menu.sh:264
msgid "Last unlock"
msgstr "上次解锁"
#: src/lib/menu.sh:268
#: src/lib/menu.sh:270
msgid "The lock screen agent is not running."
msgstr "锁屏代理没有运行。"
#: src/lib/menu.sh:318
#: src/lib/menu.sh:322
msgid ""
"On GNOME a small GNOME extension shows the bubble. Turning face unlock on "
"switches it on."
msgstr ""
"在 GNOME 上,由一个小的 GNOME 扩展显示气泡。开启人脸解锁时会一并开启它。"
#: src/lib/menu.sh:322
#: src/lib/menu.sh:326
msgid ""
"Scans when you come back to hyprlock, swaylock or face-unlock's own lock "
"screen (`face-unlock lock`, with the bubble), and opens them. Other lock "
@@ -493,31 +510,40 @@ msgstr ""
"回到 hyprlock、swaylock 或 face-unlock 自带的锁屏(`face-unlock lock`,带气"
"泡)时扫描并打开它们。其他锁屏按 Enter 扫描。"
#: src/lib/menu.sh:327
#: src/lib/menu.sh:331
msgid ""
"Unlocks the lock screen when it sees your face. Off: only your password "
"works there."
msgstr "看到你的脸时解锁锁屏。关闭:锁屏只能用密码。"
#: src/lib/menu.sh:328
#: src/lib/menu.sh:332
msgid ""
"Scans when you press a key or move the mouse on the lock screen, and when "
"the computer wakes up."
msgstr "在锁屏上按键或移动鼠标时,以及电脑唤醒时扫描。"
#: src/lib/menu.sh:329
#: src/lib/menu.sh:333
msgid ""
"Scans as soon as the screen locks. Off by default: if you lock it yourself, "
"it would unlock again right away."
msgstr "屏幕一锁定就扫描。默认关闭:如果是你自己锁的屏,它会马上又解锁。"
#: src/lib/menu.sh:330
#: src/lib/menu.sh:334
msgid ""
"sudo takes your face instead of the password. No match: you type the "
"password as usual."
msgstr "sudo 用你的脸代替密码。不匹配时,照常输入密码。"
#: src/lib/menu.sh:331
#: src/lib/menu.sh:335
msgid ""
"face-unlock's lock screen shows the bubble, and you lock with `face-unlock "
"lock`. Or keep yours: hyprlock then shows a line of text at the top. Enter "
"opens the choice."
msgstr ""
"face-unlock 的锁屏会显示气泡,用 `face-unlock lock` 锁屏。也可以保留你自己"
"的:hyprlock 会在顶部显示一行文字。按 Enter 打开选择。"
#: src/lib/menu.sh:336
msgid ""
"The picture behind face-unlock's own lock screen (`face-unlock lock`). "
"Empty: the one on your desktop. Or a file, a folder to take one from at "
@@ -526,11 +552,11 @@ msgstr ""
"face-unlock 锁屏(`face-unlock lock`)背后的图片。留空:用桌面的图片。或者一"
"个文件、从中随机挑选的文件夹,或 `none`。按 Enter 输入。"
#: src/lib/menu.sh:332
#: src/lib/menu.sh:337
msgid "Blurs the picture behind face-unlock's own lock screen."
msgstr "模糊 face-unlock 锁屏背后的图片。"
#: src/lib/menu.sh:333
#: src/lib/menu.sh:338
#, sh-printf-format
msgid ""
"The lock screen takes your face in its password check. Press Enter on the "
@@ -538,47 +564,47 @@ msgid ""
msgstr ""
"锁屏在检查密码时也接受你的人脸。在空白框中按 Enter 即可扫描。此处找到:%s。"
#: src/lib/menu.sh:334
#: src/lib/menu.sh:339
msgid ""
"The password windows of your desktop and apps, for example when you install "
"software. No match: you type the password."
msgstr "桌面和应用的密码窗口,例如安装软件时。不匹配时,输入密码即可。"
#: src/lib/menu.sh:335
#: src/lib/menu.sh:340
msgid ""
"You have to blink or turn your head a little. This also stops printed photos."
msgstr "你需要眨眼或稍微转头。这也能挡住打印的照片。"
#: src/lib/menu.sh:336
#: src/lib/menu.sh:341
msgid "No check at all. Only for trying out a camera."
msgstr "完全不检测。仅用于试用摄像头。"
#: src/lib/menu.sh:337
#: src/lib/menu.sh:342
msgid ""
"Stops photos on a phone, a tablet or glossy paper. You do not have to blink. "
"A matte printed photo can get through."
msgstr "挡住手机、平板或光面纸上的照片。无需眨眼。哑光纸打印的照片可能会通过。"
#: src/lib/menu.sh:338
#: src/lib/menu.sh:343
msgid ""
"Fewer wrong matches, but it may not know you with glasses or in bad light."
msgstr "误认更少,但戴眼镜或光线不好时可能认不出你。"
#: src/lib/menu.sh:339
#: src/lib/menu.sh:344
msgid "Knows you more easily, but also somebody who looks a lot like you."
msgstr "更容易认出你,但也更容易认出和你长得很像的人。"
#: src/lib/menu.sh:340
#: src/lib/menu.sh:345
msgid "The default. Right for most people."
msgstr "默认值。适合大多数人。"
#: src/lib/menu.sh:341
#: src/lib/menu.sh:346
msgid ""
"Your eyes have to be open and on the screen. So it does not unlock while you "
"look away or sleep."
msgstr "你的眼睛必须睁开并看着屏幕。这样你看向别处或睡着时不会解锁。"
#: src/lib/menu.sh:342
#: src/lib/menu.sh:347
msgid ""
"Automatic takes the first normal camera. After a change, set up your face "
"again. An infrared camera needs its light on (linux-enable-ir-emitter)."
@@ -586,111 +612,111 @@ msgstr ""
"“自动”会使用第一个普通摄像头。更换后请重新设置人脸。红外摄像头需要打开它的补"
"光灯(linux-enable-ir-emitter)。"
#: src/lib/menu.sh:343
#: src/lib/menu.sh:348
msgid "How long the camera looks for your face before it gives up."
msgstr "摄像头寻找你的脸多久后放弃。"
#: src/lib/menu.sh:344
#: src/lib/menu.sh:349
msgid ""
"After a sure match it keeps how you look now. So a new haircut or glasses "
"need no new setup."
msgstr "确定匹配后,会记住你现在的样子。所以换了发型或戴上眼镜也无需重新设置。"
#: src/lib/menu.sh:345
#: src/lib/menu.sh:350
msgid ""
"No scan while the laptop is closed, for example at a desk with an external "
"screen."
msgstr "笔记本合上时不扫描,例如在接了外接显示器的桌前。"
#: src/lib/menu.sh:346
#: src/lib/menu.sh:351
msgid "The bubble at the top of the screen shows what the camera is doing."
msgstr "屏幕顶部的气泡显示摄像头正在做什么。"
#: src/lib/menu.sh:347
#: src/lib/menu.sh:352
msgid "A small pill with a lock that opens."
msgstr "一个带锁的小药丸,锁会打开。"
#: src/lib/menu.sh:348
#: src/lib/menu.sh:353
msgid "An island with a face that looks around, then rings and a tick."
msgstr "一个岛,里面有一张四处张望的脸,然后是圆环和一个对勾。"
#: src/lib/menu.sh:349
#: src/lib/menu.sh:354
msgid "How fast the bubble moves."
msgstr "气泡移动的速度。"
#: src/lib/menu.sh:350
#: src/lib/menu.sh:355
msgid "Shows the bubble when sudo or an admin prompt scans your face, too."
msgstr "sudo 或管理员授权扫描你的脸时也显示气泡。"
#: src/lib/menu.sh:443
#: src/lib/menu.sh:448
#, sh-printf-format
msgid "automatic (%s)"
msgstr "自动(%s)"
#: src/lib/menu.sh:453
#: src/lib/menu.sh:458
msgid "(infrared)"
msgstr "(红外)"
#: src/lib/menu.sh:457
#: src/lib/menu.sh:462
msgid "(not connected)"
msgstr "(未连接)"
#: src/lib/menu.sh:466
#: src/lib/menu.sh:471
msgid "same as desktop"
msgstr "与桌面相同"
#: src/lib/menu.sh:470
#: src/lib/menu.sh:475
msgid "none"
msgstr "无"
#: src/lib/menu.sh:487
#: src/lib/menu.sh:504
msgid "Picture or folder:"
msgstr "图片或文件夹:"
#: src/lib/menu.sh:492
#: src/lib/menu.sh:509
#, sh-printf-format
msgid "Not found: %s"
msgstr "未找到:%s"
#: src/lib/menu.sh:563 src/lib/menu.sh:750
#: src/lib/menu.sh:580 src/lib/menu.sh:771
msgid "Settings"
msgstr "设置"
#: src/lib/menu.sh:564
#: src/lib/menu.sh:581
msgid "↑↓ select ←→ or Space: change q: back"
msgstr "↑↓ 选择 ←→ 或空格:更改 q:返回"
#: src/lib/menu.sh:565
#: src/lib/menu.sh:582
msgid "for all users, asks for your password"
msgstr "对所有用户生效,需要你的密码"
#. TRANSLATORS: keep the letters, they are the keys.
#: src/lib/menu.sh:662
#: src/lib/menu.sh:683
msgid "Up/Down: select, Space: on/off, r: rename, d: delete, a: add, q: back"
msgstr "上/下:选择,空格:开/关,r:重命名,d:删除,a:添加,q:返回"
#: src/lib/menu.sh:663
#: src/lib/menu.sh:684
msgid "No face is set up yet. Press a to add one."
msgstr "尚未设置任何人脸。按 a 添加。"
#: src/lib/menu.sh:709
#: src/lib/menu.sh:730
msgid "New name:"
msgstr "新名称:"
#: src/lib/menu.sh:716
#: src/lib/menu.sh:737
#, sh-printf-format
msgid "Delete \"%s\"?"
msgstr "删除“%s”?"
#: src/lib/menu.sh:747
#: src/lib/menu.sh:768
msgid "Turn face unlock on or off"
msgstr "开启或关闭人脸解锁"
#: src/lib/menu.sh:751
#: src/lib/menu.sh:772
msgid "Try it"
msgstr "试一试"
#: src/lib/menu.sh:752
#: src/lib/menu.sh:773
msgid "Quit"
msgstr "退出"
@@ -734,6 +760,47 @@ msgid ""
"Hyprland does not start the lock screen agent by itself. Add this to %s:"
msgstr "Hyprland 不会自动启动锁屏代理。请把以下内容加入 %s:"
#: src/lib/system.sh:267 src/lib/system.sh:270
#, sh-printf-format
msgid "To lock with it, add this to %s, and set %s in %s:"
msgstr "要用它锁屏,请把这行加入 %s,并把 %s 写进 %s:"
#: src/lib/system.sh:275
#, sh-printf-format
msgid "To lock with it, add this to the binds in %s, and use %s in swayidle:"
msgstr "要用它锁屏,请把这行加入 %s 的 binds,并在 swayidle 中使用 %s:"
#: src/lib/system.sh:279
#, sh-printf-format
msgid "To lock with it, run %s where your lock screen is started now."
msgstr "要用它锁屏,请在现在启动锁屏的地方运行 %s。"
#: src/lib/system.sh:292
msgid "You lock with face-unlock's lock screen now."
msgstr "现在用 face-unlock 的锁屏锁定。"
#: src/lib/system.sh:299
msgid ""
"hyprlock shows what face unlock is doing at the top, from the next time it "
"locks."
msgstr "从下次锁屏起,hyprlock 会在顶部显示 face unlock 正在做什么。"
#: src/lib/system.sh:300
#, sh-printf-format
msgid "Could not add the line to %s."
msgstr "无法把这行加入 %s。"
#: src/lib/system.sh:301
msgid ""
"Your lock screen stays as it is. Press Enter on the empty password field to "
"scan."
msgstr "你的锁屏保持不变。在空密码框中按 Enter 即可扫描。"
#: src/lib/system.sh:302
#, sh-printf-format
msgid "hyprlock has no %s, so it cannot show the text."
msgstr "hyprlock 没有 %s,所以无法显示文字。"
#: src/lib/menu.sh
msgid "Unlock with your face"
msgstr "用人脸解锁"
@@ -746,6 +813,10 @@ msgstr "你回来时扫描"
msgid "Scan right after locking"
msgstr "锁定后立即扫描"
#: src/lib/menu.sh
msgid "Which lock screen"
msgstr "使用哪个锁屏"
#: src/lib/menu.sh
msgid "Wallpaper"
msgstr "壁纸"
@@ -910,34 +981,47 @@ msgstr "摄像头正忙于另一次扫描。请稍后重试。"
msgid "The face could not be added (%1)."
msgstr "无法添加人脸(%1)。"
#: src/agent/lockpreview.cpp:349 src/agent/lockpreview.cpp:559
#: src/agent/locktext.cpp:45
msgid "Looking for your face…"
msgstr "正在寻找你的脸…"
#: src/agent/lockscreencontroller.cpp:172
msgid "Wrong password"
msgstr "密码错误"
#: src/agent/main.cpp:185
#: src/agent/locktext.cpp:48
msgid "Face recognized"
msgstr "已识别面容"
#: src/agent/main.cpp:244
msgid "Face unlock for the lock screen, sudo and admin prompts"
msgstr "用于锁屏、sudo 和管理员授权的人脸解锁"
#: src/agent/main.cpp:188
#: src/agent/main.cpp:247
msgid "Set up a face."
msgstr "设置一张人脸。"
#: src/agent/main.cpp:189
#: src/agent/main.cpp:248
msgid "What to call the new face."
msgstr "新人脸的名称。"
#: src/agent/main.cpp:190
#: src/agent/main.cpp:249
msgid "Lock the screen."
msgstr "锁定屏幕。"
#: src/agent/main.cpp:191
#: src/agent/main.cpp:250
msgid "Play the bubble's animations once."
msgstr "播放一次气泡动画。"
#: src/agent/main.cpp:193
#: src/agent/main.cpp:252
msgid "Bubble style for the demo: full or minimal."
msgstr "演示用的气泡样式:full 或 minimal。"
#: src/agent/main.cpp:253
msgid "Ask which lock screen to use, and print the answer."
msgstr "询问使用哪个锁屏,并输出答案。"
#: src/pam/pam_face_unlock.c:356
msgid "Look at the camera to unlock."
msgstr "看着摄像头来解锁。"
@@ -993,7 +1077,7 @@ msgstr ""
msgid "Name (optional)"
msgstr "名称(可选)"
#: src/agent/qml/Enroll.qml:177
#: src/agent/qml/Enroll.qml:177 src/agent/qml/LockChoice.qml:255
msgid "Cancel"
msgstr "取消"
@@ -1013,14 +1097,63 @@ msgstr "开始"
msgid "Done"
msgstr "完成"
#: src/agent/qml/LockScreen.qml:171
#: src/agent/qml/LockChoice.qml:52
msgid "Choose your lock screen"
msgstr "选择锁屏"
#: src/agent/qml/LockChoice.qml:198
msgid "Your lock screen"
msgstr "你的锁屏"
#: src/agent/qml/LockChoice.qml:209
msgid ""
"Your desktop leaves the lock screen to a program of your choice. Pick how "
"face unlock shows up there. You can change it later under Settings."
msgstr ""
"你的桌面把锁屏交给你选择的程序。请选择 face unlock 在那里如何显示。之后可以在"
"设置中更改。"
#: src/agent/qml/LockChoice.qml:232
msgid "face-unlock's lock screen"
msgstr "face-unlock 的锁屏"
#: src/agent/qml/LockChoice.qml:233
msgid ""
"The bubble at the top, the time and your wallpaper. Your shortcut and idle "
"lock then run face-unlock lock."
msgstr ""
"顶部的气泡、时间和你的壁纸。你的快捷键和空闲锁屏会运行 face-unlock lock。"
#: src/agent/qml/LockChoice.qml:240
msgid "Keep your lock screen"
msgstr "保留你的锁屏"
#: src/agent/qml/LockChoice.qml:242
msgid ""
"It stays as it is. hyprlock shows a line of text at the top instead of the "
"bubble. Enter on the empty password field scans."
msgstr ""
"保持不变。hyprlock 会在顶部显示一行文字,代替气泡。在空密码框中按 Enter 即可"
"扫描。"
#: src/agent/qml/LockChoice.qml:243
msgid ""
"It stays as it is, without the bubble. Enter on the empty password field "
"scans."
msgstr "保持不变,没有气泡。在空密码框中按 Enter 即可扫描。"
#: src/agent/qml/LockChoice.qml:260
msgid "Continue"
msgstr "继续"
#: src/agent/qml/LockScreen.qml:180
msgid "Password"
msgstr "密码"
#: src/agent/qml/LockScreen.qml:185
#: src/agent/qml/LockScreen.qml:194
msgid "Look at the camera or type your password"
msgstr "看向摄像头或输入密码"
#: src/agent/qml/LockScreen.qml:186
#: src/agent/qml/LockScreen.qml:195
msgid "Type your password"
msgstr "输入密码"