chore: 1.5.0

KDE's own middle-click paste is turned off along with everything else. Inside a
Chromium application the flag already settles it - with autoscroll on, Blink
stops pasting the primary selection - but everywhere else on the desktop middle
click goes on pasting, which is the thing this program exists to get away from.

KWin has a switch for it on a Wayland session, where the paste is a protocol
the compositor either offers or does not, and that is what gets written. It is
true from the next login on. What the key said before is recorded, so disable
puts it back, and a key that already said no is left alone and never switched
back on. X11 has no such switch and nothing is written there.

Off under Settings for anyone who wants the paste kept.

Makefile

@@ -8,7 +8,7 @@
 # Overridable so a packager can pass the version it is actually building
 # (`make VERSION=$pkgver`). The literal below is the fallback for builds
 # straight from a checkout, and is what a release tag has to carry.
-VERSION      ?= 1.1.0
+VERSION      ?= 1.5.0
 
 PREFIX       ?= /usr
 DESTDIR      ?=
@@ -23,13 +23,17 @@ MANDIR       ?= $(DATADIR)/man
 # distribution that still keeps /lib separate from /usr/lib says so here - and
 # only guessed at when there is no systemd installed to ask.
 #
-# A build with a prefix of its own keeps the units under that prefix instead.
-# systemd searches $(PREFIX)/lib/systemd/user as well, and a file outside the
-# prefix it was asked for is not this build's to place.
+# A build with a prefix of its own keeps the units under that prefix instead,
+# and under share rather than lib. systemd searches both for a system prefix,
+# but only share for a home one: $XDG_DATA_HOME/systemd/user is a search path
+# and ~/.local/lib/systemd/user is not, so an install into ~/.local that put
+# the units in lib would leave the watcher impossible to enable. That prefix is
+# the one an atomic distribution leaves a user - there is no writing to /usr on
+# Bazzite or Silverblue without layering a package and rebooting.
 ifeq ($(PREFIX),/usr)
 USERUNITDIR  ?= $(shell pkg-config --variable=systemduserunitdir systemd 2>/dev/null || echo /usr/lib/systemd/user)
 else
-USERUNITDIR  ?= $(PREFIX)/lib/systemd/user
+USERUNITDIR  ?= $(DATADIR)/systemd/user
 endif
 
 LINGUAS      := de

README.md

@@ -1,21 +1,82 @@
 # middleclick-autoscroll
 
-Middle-click autoscroll for Linux. Hold the middle mouse button, move the
-mouse, the page scrolls — like on Windows. Works with browsers, Electron apps,
-Flatpaks, snaps, Steam, and anything else that runs on Chromium under the hood.
+middleclick-autoscroll (what a great name, wow) is a CLI for linux that enables autoscroll in every application that supports it.
+Works with browsers, electron apps like discord and spotify, steam, and anything else that runs on chromium.
 
-No app list to maintain. The program looks at what's actually installed, figures
-out what's Chromium-based, and handles it.
+This tool looks at which of your apps run chromium under the hood and applies the necessary steps to get autoscrolling working (often just a feature flag). One install, one command and autoscroll _✨just works✨_ (like on windows).
 
-## Installing
+## How to use
 
-**Arch, CachyOS, EndeavourOS, Manjaro**
+Just run `middleclick-autoscroll`. This will open the configuration TUI that looks like this:
 
-```bash
-paru -S middleclick-autoscroll
+```
+  Middle-Click Autoscroll
+
+  Autoscroll                     ON
+
+  Applications covered           11 of 13
+  Not identified                 1 - see the applications list
+  Steam                          ON
+  New applications               ON
+  Middle-click paste             off
+  Last applied                   2 minutes ago
+
+  Applications pick this up the next time they are started.
+
+  [1] Turn autoscroll on or off
+  [2] Re-apply everything
+  [3] Applications
+  [4] Settings
+  [q] Quit
+
+  >
 ```
 
-**Debian, Ubuntu, Linux Mint, Pop!_OS**
+Normally you just need to press `[1]` and the magic is done.
+Pressing `[3]` lets you see every app that was found and toggle each one individually. 
+
+```
+  Applications
+
+  ▸ Steam                              on (Steam)
+    Chromium                           on (launcher)
+    Discord                            on (flag file)
+    Obsidian                           on (launcher)
+    Spotify                            on (launcher)
+    Slack                              off
+    Cursor                             cannot tell
+
+  Up/Down select - Space turns one on or off - q goes back
+```
+
+You can also press `[4]` for more settings.
+
+## How to install
+
+**Arch (for the cachyos enjoyers)**
+
+```bash
+yay -S middleclick-autoscroll
+```
+
+**Fedora (for the mentally stable)**
+
+```bash
+sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
+  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
+sudo dnf install middleclick-autoscroll
+```
+
+**Bazzite (for the reboot enjoyers)**
+
+```bash
+sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
+  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
+sudo rpm-ostree install middleclick-autoscroll
+systemctl reboot
+```
+
+**Debian (for the elderly)**
 
 ```bash
 sudo install -d -m 0755 /etc/apt/keyrings
@@ -26,15 +87,7 @@ echo "deb [signed-by=/etc/apt/keyrings/middleclick-autoscroll.gpg] https://felit
 sudo apt update && sudo apt install middleclick-autoscroll
 ```
 
-**Fedora, RHEL, CentOS Stream**
-
-```bash
-sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
-  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
-sudo dnf install middleclick-autoscroll
-```
-
-**openSUSE**
+**openSUSE (for the both of you)**
 
 ```bash
 sudo rpm --import https://felitendo.github.io/middleclick-autoscroll/KEY.gpg
@@ -43,40 +96,27 @@ sudo zypper addrepo --gpgcheck --refresh \
 sudo zypper install middleclick-autoscroll
 ```
 
-Then run `middleclick-autoscroll enable`. That's it — nothing else to configure.
-
-Updates come through your package manager like anything else. Without a package,
-build [from source](#building-from-source) or grab a `.deb`/`.rpm` from the
-[releases page](https://github.com/Felitendo/middleclick-autoscroll/releases).
-
-Run `middleclick-autoscroll disable` before removing the package — it undoes
-everything.
-
 ## How it works
 
 Blink (the engine in Chromium, Electron, and CEF) already has autoscroll, but
-it's off on Linux because middle click does primary-selection paste there. One
-flag turns it on:
+it's off on Linux by default because middle click normally pastes the clipboard (??).
+This flag turns it on:
 
-```
 --enable-blink-features=MiddleClickAutoscroll
-```
 
-Doing that for one app is a five-minute job. Doing it for *all* of them — across
-flag files, desktop entries, Flatpaks, snaps, autostart entries, Steam — so it
-survives upgrades, is not. That's what this does.
+But doing that for every app is kinda bothersome and it also might break with updates.
+That's why I created this small tool to automate that.
 
-New apps are picked up within a second by a systemd path unit that watches the
-relevant directories. Without systemd, `middleclick-autoscroll apply` does the
+Browsers get the same thing but this time without "blink":
+
+--enable-features=MiddleClickAutoscroll
+
+But both do the same ¯\_(ツ)_/¯
+
+New apps are picked up by a systemd path unit that watches the
+relevant directories. If you hate systemd; `middleclick-autoscroll apply` does the
 same thing manually.
 
-## Steam
-
-Steam's web UI supports autoscroll but has no way to pass extra arguments to its
-helper. The program patches the helper launch script and adds `-noverifyfiles`
-to Steam's launcher so the patch sticks. That means Steam won't auto-repair
-damaged files on its own — you can turn this off separately in the settings.
-
 ## Commands
 
 | Command | |
@@ -89,8 +129,6 @@ damaged files on its own — you can turn this off separately in the settings.
 | `… status` | What's covered |
 | `… list` | All apps and how they're handled |
 
-See `man middleclick-autoscroll` for more.
-
 ## Building from source
 
 ```bash

doc/middleclick-autoscroll.1.scd

@@ -18,7 +18,18 @@ on the command line.
 
 *middleclick-autoscroll* finds every Chromium-based application on the system
 and puts that argument somewhere the application will actually read it, then
-keeps doing so for anything installed later. It works on any distribution:
+keeps doing so for anything installed later.
+
+A browser is given *--enable-features=MiddleClickAutoscroll* instead. It asks
+for the same feature - Blink generates a feature of that name for each of its
+runtime flags - but it is not on the list of flags Chromium warns about, so the
+browser does not put a bar reading "You are using an unsupported command-line
+flag" above every page. That spelling only works from Chromium 124 onwards,
+which is why everything else keeps the first one: an application that embeds an
+older Chromium, such as Steam's CEF, has no such bar to show anyway. Helium
+knows the feature under a name of its own and is asked for
+*HeliumMiddleClickAutoscroll* as well; a name a browser does not know is
+ignored. It works on any distribution:
 which of the routes below an application takes is read off its launcher, not
 assumed from where the launcher came from.
 
@@ -71,10 +82,10 @@ Two ways, chosen per application.
 	Where the launcher reads extra arguments from
 	_$XDG_CONFIG_HOME/<name>-flags.conf_. This is the preferred route: it is
 	the supported way to pass arguments, it survives package upgrades, and it
-	applies to a launch from a terminal as much as one from the menu. An
-	*--enable-blink-features* line that is already in the file is extended
-	rather than duplicated - Chromium keeps only the last occurrence of that
-	option, so a second one would switch the first one off.
+	applies to a launch from a terminal as much as one from the menu. A
+	feature list that is already in the file is extended rather than
+	duplicated - Chromium keeps only the last occurrence of such an option, so
+	a second one would switch the first one off.
 
 	Arch's Electron and Chromium packages all wrap their binaries this way, and
 	so do a number of individual vendors' launchers elsewhere. Whether a given
@@ -102,6 +113,13 @@ Programs that start themselves at login write their own entry into
 _~/.config/autostart_ pointing straight at their binary, bypassing the menu
 entry entirely. Those are patched in place as well.
 
+Shortcuts on the desktop itself are patched in place too. Nothing in the XDG
+search path looks at that folder, so a shortcut that lives only there would
+otherwise be invisible - and Steam puts one there for every game somebody asks
+for a shortcut to. The folder's name is translated, and the name in use is read
+from _~/.config/user-dirs.dirs_ rather than guessed; the watcher is told about
+it in a drop-in written when autoscroll is turned on.
+
 # STEAM
 
 Steam's interface is CEF and supports the feature, but Steam builds the command
@@ -116,26 +134,35 @@ _~/.steam/debian-installation_ for Debian's, and the private tree of the
 sandbox for the Flatpak and the snap. All of them are looked at.
 
 Steam compares the installed files against its manifest at every start - by
-size, not by content - and restores whatever differs, so its launcher entry
-gets *-noverifyfiles*. So does its entry in _~/.config/autostart_, which Steam
-writes as soon as it is set to run at login: that entry bypasses the menu one
-entirely, and without the switch a Steam started at login spends the session in
-an update dialog. The trade-off is that Steam no longer repairs a damaged
-installation on its own; that is why Steam is a switch of its own in the
-settings.
+size and timestamp rather than by content - and restores whatever differs. So
+the patch is written to look untouched: the bytes the argument costs are taken
+back out of the script's own comments and the timestamp is put back afterwards,
+leaving a file exactly as long and exactly as old as Steam left it. A client
+that checks its files finds nothing to repair, and the argument survives
+however Steam was started - from the menu, from a game shortcut, from a
+launcher like Heroic or Lutris, from a terminal.
 
-The shortcuts Steam writes for single games carry the switch too. A game is not
-an application this program has anything to offer and none of them is listed
-under *Applications*, but starting one with Steam closed is a Steam start like
-any other, and without the switch it costs the interface its autoscroll for the
-rest of the session.
+That is what has to work, because it is the only thing that does. A patch that
+changes the length is never written, whatever else could be done to cover for
+it: Steam checks its files at the shutdown it runs itself as well as at a start
+it was given arguments for, and that one carries no arguments of anybody's. One
+wrong length costs the whole client package downloaded, extracted and installed
+again, and a client that quits at the end of it instead of coming up.
 
-Starting Steam some other way - from a terminal, from a script - leaves the
-switch out, and Steam puts its own copy of the script back for that session.
-The patch returns at the next apply with Steam closed. It is deliberately not
-repeated while the client is running: the two would only undo each other, and
-the helper is started once, at the start, so it would not help that session
-anyway.
+So where the comments cannot pay for the argument, or a client update has
+changed how the helper is started, nothing is written and the status screen
+says Steam is not patched. Nothing goes on Steam's launcher entry, its
+autostart entry or the shortcuts it writes for single games either, and Steam
+goes on repairing its own installation.
+
+An installation patched by an earlier version, which appended where the
+comments were short, is written again to fit at the next apply, or taken back
+if it cannot be made to.
+
+A client update brings a new version of the script. The watcher notices and
+patches it again, and the copy kept for undoing is replaced with the new
+version at the same time, so undoing puts back the script Steam last shipped
+rather than the one from before the update.
 
 # SPOTIFY
 
@@ -145,6 +172,35 @@ and has a configuration file with a slot for extra arguments; that slot is
 where the flag goes. Installed as a plain package, a Flatpak or a snap, it is
 an ordinary desktop entry and needs nothing special.
 
+# MIDDLE-CLICK PASTE
+
+Inside a Chromium application the argument settles this on its own: with
+autoscroll on, Blink stops pasting the primary selection on middle click,
+because the button is doing something else now. Everywhere else on the desktop
+middle click goes on pasting, so the desktop's own switch for it is turned off
+too.
+
+KDE has such a switch, and only for a Wayland session, where the paste is a
+protocol the compositor either offers or does not:
+
+	~/.config/kwinrc, [Wayland], EnablePrimarySelection=false
+
+It is written with *kwriteconfig6*, the same tool System Settings uses, because
+kwinrc has a cascade behind it and entries a distribution can mark immutable;
+an edit that reaches past all that writes something KDE goes on to ignore. KWin
+reads the key once, while it starts, so the change is true from the next login
+on rather than straight away.
+
+What the key said before is recorded, and *disable* puts that back. A key that
+already said *false* before any of this is left alone and not recorded either,
+so a paste the user switched off themselves is never switched back on.
+
+On X11 there is nothing to switch. The primary selection is part of X itself
+and every toolkit reaches for it on its own; no one place can say no. The
+status screen leaves the row out where there is nothing to report.
+
+Turn it off under *Settings* to keep the desktop's middle-click paste.
+
 # WHAT CANNOT BE DETECTED
 
 An AppImage keeps its payload in a compressed filesystem, so there is no way to
@@ -163,6 +219,11 @@ _~/.local/state/middleclick-autoscroll/ledger_
 _~/.local/state/middleclick-autoscroll/backup/_
 	Copies of the files that are edited in place rather than shadowed.
 
+_~/.config/kwinrc_
+	KDE's own configuration. One key in it, *EnablePrimarySelection*, is
+	written when the desktop's middle-click paste is turned off, and put
+	back by *disable*.
+
 _~/.cache/middleclick-autoscroll/detect_
 	Which programs were found to be Chromium, keyed by size and modification
 	time. Safe to delete.
@@ -180,7 +241,7 @@ up at the next *apply* rather than on their own.
 
 # SEE ALSO
 
-*systemctl*(1), *flatpak*(1), *snap*(8)
+*systemctl*(1), *flatpak*(1), *snap*(8), *kwriteconfig6*(1)
 
 # AUTHORS
 

po/de.po

@@ -43,9 +43,6 @@ msgstr "nicht erkennbar"
 msgid "not patched yet"
 msgstr "noch nicht gepatcht"
 
-msgid "waiting until Steam is closed"
-msgstr "wartet, bis Steam geschlossen ist"
-
 
 #. Status block
 msgid "Autoscroll"
@@ -66,6 +63,9 @@ msgstr "%d – siehe Anwendungsliste"
 msgid "Steam"
 msgstr "Steam"
 
+msgid "Middle-click paste"
+msgstr "Mittelklick-Einfügen"
+
 msgid "New applications"
 msgstr "Neue Anwendungen"
 
@@ -115,6 +115,9 @@ msgstr "Programme, die sich beim Anmelden selbst starten"
 msgid "Spotify"
 msgstr "Spotify"
 
+msgid "Turn off KDE's middle-click paste"
+msgstr "KDEs Mittelklick-Einfügen abschalten"
+
 msgid "Apply to newly installed applications"
 msgstr "Auf neu installierte Anwendungen anwenden"
 
@@ -155,9 +158,6 @@ msgstr "Autoscroll ist für %d Anwendungen an."
 msgid "Applications that are already running pick this up when they are restarted."
 msgstr "Bereits laufende Anwendungen übernehmen das nach einem Neustart."
 
-msgid "Steam's launcher now skips its file check, which is what keeps the change from being undone at every start."
-msgstr "Steams Startereintrag überspringt jetzt die Dateiprüfung – nur so bleibt die Änderung bei jedem Start erhalten."
-
 msgid "Could not start the watcher for newly installed applications."
 msgstr "Die Überwachung neu installierter Anwendungen konnte nicht gestartet werden."
 
@@ -179,11 +179,14 @@ msgstr "Auf %d Anwendungen angewendet."
 msgid "Already applied to %d applications."
 msgstr "Bereits auf %d Anwendungen angewendet."
 
-msgid "Steam starts its interface in a way this version does not recognise; leaving it alone."
-msgstr "Steam startet seine Oberfläche auf eine Art, die diese Version nicht kennt; Steam bleibt unangetastet."
+msgid "Steam starts its interface in a way this version cannot change without Steam noticing; leaving it alone."
+msgstr "Steam startet seine Oberfläche auf eine Art, die diese Version nicht ändern kann, ohne dass Steam es merkt; Steam bleibt unangetastet."
 
-msgid "Steam is running and has put its own file back; the change waits until Steam is closed."
-msgstr "Steam läuft und hat seine eigene Datei wiederhergestellt; die Änderung wird nachgeholt, sobald Steam geschlossen ist."
+msgid "Steam's interface cannot be given the flag without leaving a file Steam would reinstall; the change has been taken back."
+msgstr "Steams Oberfläche lässt sich das Flag nicht geben, ohne eine Datei zu hinterlassen, die Steam neu installieren würde; die Änderung wurde zurückgenommen."
+
+msgid "Middle click stops pasting at the next login."
+msgstr "Mittelklick fügt ab der nächsten Anmeldung nichts mehr ein."
 
 
 #. Help

po/middleclick-autoscroll.pot

@@ -43,9 +43,6 @@ msgstr ""
 msgid "not patched yet"
 msgstr ""
 
-msgid "waiting until Steam is closed"
-msgstr ""
-
 
 #. Status block
 msgid "Autoscroll"
@@ -66,6 +63,9 @@ msgstr ""
 msgid "Steam"
 msgstr ""
 
+msgid "Middle-click paste"
+msgstr ""
+
 msgid "New applications"
 msgstr ""
 
@@ -115,6 +115,9 @@ msgstr ""
 msgid "Spotify"
 msgstr ""
 
+msgid "Turn off KDE's middle-click paste"
+msgstr ""
+
 msgid "Apply to newly installed applications"
 msgstr ""
 
@@ -155,9 +158,6 @@ msgstr ""
 msgid "Applications that are already running pick this up when they are restarted."
 msgstr ""
 
-msgid "Steam's launcher now skips its file check, which is what keeps the change from being undone at every start."
-msgstr ""
-
 msgid "Could not start the watcher for newly installed applications."
 msgstr ""
 
@@ -179,10 +179,13 @@ msgstr ""
 msgid "Already applied to %d applications."
 msgstr ""
 
-msgid "Steam starts its interface in a way this version does not recognise; leaving it alone."
+msgid "Steam starts its interface in a way this version cannot change without Steam noticing; leaving it alone."
 msgstr ""
 
-msgid "Steam is running and has put its own file back; the change waits until Steam is closed."
+msgid "Steam's interface cannot be given the flag without leaving a file Steam would reinstall; the change has been taken back."
+msgstr ""
+
+msgid "Middle click stops pasting at the next login."
 msgstr ""
 
 

res/systemd/middleclick-autoscroll.path

@@ -23,12 +23,18 @@ PathModified=/run/current-system/sw/share/applications
 PathModified=%h/.nix-profile/share/applications
 PathModified=%h/.guix-profile/share/applications
 
+# The desktop folder is watched too - Steam writes a shortcut there for every
+# game somebody asks for one, and starting a game is a Steam start - but its
+# name is translated and cannot be written down here. `enable` adds it in a
+# drop-in, from the name this system uses.
+
 # Steam replaces the script that starts its interface on every client update,
 # which takes the patch with it. Where that installation lives depends on how
 # Steam was installed.
 PathChanged=%h/.local/share/Steam/ubuntu12_64/steamwebhelper_sniper_wrap.sh
 PathChanged=%h/.steam/debian-installation/ubuntu12_64/steamwebhelper_sniper_wrap.sh
 PathChanged=%h/.var/app/com.valvesoftware.Steam/.local/share/Steam/ubuntu12_64/steamwebhelper_sniper_wrap.sh
+PathChanged=%h/.var/app/com.valvesoftware.Steam/data/Steam/ubuntu12_64/steamwebhelper_sniper_wrap.sh
 PathChanged=%h/snap/steam/common/.local/share/Steam/ubuntu12_64/steamwebhelper_sniper_wrap.sh
 
 Unit=middleclick-autoscroll.service

src/lib/apply.sh

@@ -66,6 +66,15 @@ mca_apply() {
 	MCA_N_ON=0; MCA_N_OFF=0; MCA_N_UNKNOWN=0
 
 	mca_config_load
+
+	# An installation that was set up by a version whose answer was a different
+	# flag still has that flag where it put it, and nothing below would touch it
+	# again: a file that is already marked as patched is left alone. Taking
+	# everything back once, here, is what carries such an installation over.
+	if [[ "$(mca_state_read flag_scheme 1)" != "$MCA_FLAG_SCHEME" ]]; then
+		mca_revert_all
+	fi
+
 	mca_scan
 
 	for i in "${!MCA_IDS[@]}"; do
@@ -87,13 +96,16 @@ mca_apply() {
 
 		case "$route" in
 			flags)
-				mca_flags_apply "$prog" || mca_desktop_apply "$id" "$file"
+				mca_flags_apply "$prog" "$kind" \
+					|| mca_desktop_apply "$id" "$file" "$(mca_flags "$kind")"
 				;;
 			desktop)
-				mca_desktop_apply "$id" "$file"
+				mca_desktop_apply "$id" "$file" "$(mca_flags "$kind")"
 				;;
 			steam)
-				mca_steam_desktop_apply "$id" "$file"
+				# Nothing is done to the entry itself: what Steam needs is
+				# in its own installation, and the same patch serves every
+				# way of starting the client.
 				if (( ! steam_done )); then
 					mca_steam_apply
 					steam_done=1
@@ -108,25 +120,25 @@ mca_apply() {
 		mca_steam_apply
 	fi
 
-	# The shortcuts Steam writes for single games. They are not applications
-	# and are not offered as ones, but starting a game with Steam closed is a
-	# Steam start like any other: without the switch the client finds the
-	# patched helper script, puts its own back, and the interface loses
-	# autoscroll for the rest of the session.
-	if [[ $CFG_STEAM == yes ]]; then
-		for i in "${!MCA_STEAM_LINKS[@]}"; do
-			mca_steam_desktop_apply "${MCA_STEAM_LINKS[i]}" "${MCA_STEAM_LINK_FILES[i]}"
-		done
-	fi
-
-	# Steam's autostart entry carries Steam's own switch and follows the Steam
-	# setting, not this one - leaving it out while Steam is patched is what puts
-	# the client in an update loop - so both are checked inside.
-	if [[ $CFG_AUTOSTART == yes || $CFG_STEAM == yes ]]; then
+	# Autostart entries. A Chromium application that starts itself at login
+	# points straight at its binary and never reads the entry in the menu, so
+	# Discord at login used to behave differently from Discord from the menu.
+	if [[ $CFG_AUTOSTART == yes ]]; then
 		mca_autostart_apply
 	fi
+
+	# Shortcuts on the desktop itself, which nothing above has seen: the XDG
+	# search path does not go there. Each entry is gated on its own, so there is
+	# nothing to check out here.
+	mca_shortcuts_apply
+
 	[[ $CFG_SPOTIFY == yes ]] && mca_spotify_apply
 
+	# Not about any one application: middle click goes on pasting everywhere
+	# else on the desktop, and KDE is the one desktop that can be told not to.
+	# See kde.sh.
+	[[ $CFG_PASTE == yes ]] && mca_kde_paste_apply
+
 	mca_prune_orphans
 
 	if (( MCA_CHANGES )) && mca_have update-desktop-database; then
@@ -134,6 +146,7 @@ mca_apply() {
 	fi
 
 	mca_state_write last_apply "$(date +%s)"
+	mca_state_write flag_scheme "$MCA_FLAG_SCHEME"
 	return 0
 }
 
@@ -161,6 +174,12 @@ mca_revert() {
 MCA_UNIT_PATH="middleclick-autoscroll.path"
 MCA_UNIT_SERVICE="middleclick-autoscroll.service"
 
+# The desktop folder is watched like every other directory an entry can turn up
+# in, but its name is translated and the unit that ships with the package
+# cannot know it. So that one path is written here, into a drop-in, from the
+# name this system actually uses.
+MCA_UNIT_DROPIN="${MCA_XDG_CONFIG}/systemd/user/${MCA_UNIT_PATH}.d"
+
 mca_watch_available() {
 	mca_have systemctl && [[ -n ${XDG_RUNTIME_DIR:-} || -S "/run/user/$(id -u)/bus" ]]
 }
@@ -170,17 +189,56 @@ mca_watch_enabled() {
 	systemctl --user is-enabled --quiet "$MCA_UNIT_PATH" 2>/dev/null
 }
 
+# _mca_watch_dropin_write
+# Returns 0 when the drop-in changed and systemd has to be told, 1 when it was
+# already right - the same contract as mca_write_if_changed, and for the same
+# reason: the watcher runs after every desktop entry that appears anywhere on
+# the system, and a daemon-reload each time would be absurd.
+_mca_watch_dropin_write() {
+	local dir file="$MCA_UNIT_DROPIN/desktop.conf" content
+
+	dir="$(mca_desktop_folder)"
+	[[ -d $dir ]] || { _mca_watch_dropin_remove; return $?; }
+
+	# A per cent sign starts a specifier in a unit file and has to be doubled
+	# to mean itself. Rare in a folder name, fatal when it happens.
+	content="[Path]"$'\n'"PathModified=${dir//%/%%}"$'\n'
+
+	mca_write_if_changed "$file" "$content"
+}
+
+_mca_watch_dropin_remove() {
+	[[ -e "$MCA_UNIT_DROPIN/desktop.conf" ]] || return 1
+	rm -f -- "$MCA_UNIT_DROPIN/desktop.conf"
+	rmdir "$MCA_UNIT_DROPIN" 2>/dev/null || true
+	return 0
+}
+
 mca_watch_enable() {
 	mca_watch_available || return 1
+	_mca_watch_dropin_write
+	systemctl --user daemon-reload > /dev/null 2>&1 || true
 	systemctl --user enable --now "$MCA_UNIT_PATH" > /dev/null 2>&1 || return 1
 	systemctl --user enable "$MCA_UNIT_SERVICE" > /dev/null 2>&1 || true
 	return 0
 }
 
+# mca_watch_refresh
+# Keeps a running watcher in step with a desktop folder that has been renamed,
+# which is what a change of session language does to it.
+mca_watch_refresh() {
+	mca_watch_available || return 0
+	_mca_watch_dropin_write || return 0
+	systemctl --user daemon-reload > /dev/null 2>&1 || true
+	systemctl --user restart "$MCA_UNIT_PATH" > /dev/null 2>&1 || true
+	return 0
+}
+
 mca_watch_disable() {
 	mca_watch_available || return 0
 	systemctl --user disable --now "$MCA_UNIT_PATH" > /dev/null 2>&1 || true
 	systemctl --user disable "$MCA_UNIT_SERVICE" > /dev/null 2>&1 || true
+	_mca_watch_dropin_remove && systemctl --user daemon-reload > /dev/null 2>&1
 	return 0
 }
 

src/lib/common.sh

@@ -13,11 +13,46 @@ MCA_PRETTY="Middle-Click Autoscroll"
 # The whole point of the package. Blink implements Windows-style autoscroll
 # behind a runtime flag that Chromium does not turn on for Linux, because
 # middle click is taken by primary-selection paste there.
+#
+# There are two ways to ask for that flag, and which one is right depends on
+# what is being started:
+#
+#   --enable-blink-features=MiddleClickAutoscroll is the one that works
+#   everywhere, and the only one that works in the Chromium versions embedded
+#   applications ship - Steam's CEF, an Electron a few years old, anything
+#   before Chromium 124. A browser started with it puts a yellow bar above the
+#   page saying an unsupported command line flag is in use, because Chromium
+#   keeps a list of flags worth warning about and this is on it.
+#
+#   --enable-features=MiddleClickAutoscroll is not on that list, so a browser
+#   started with it says nothing. Blink generates a feature of the same name
+#   for every one of its runtime flags, which is what makes the two the same
+#   request - but only since Chromium 124. Before that the name means nothing
+#   and is ignored without a word.
+#
+# So a browser, which is the only thing that shows the bar and the one thing
+# that keeps itself up to date, is given the quiet one; everything else keeps
+# the one that always works.
 MCA_FLAG="--enable-blink-features=MiddleClickAutoscroll"
 
-# The Blink feature name on its own, for merging into an --enable-blink-features
-# list that an app (or the user) already carries.
+# Helium ships the feature under its own name and does not answer to the
+# Chromium one, so browsers are asked for both. A name a browser does not know
+# is ignored, which is what makes one list safe to hand to all of them.
+MCA_BROWSER_FLAG="--enable-features=MiddleClickAutoscroll,HeliumMiddleClickAutoscroll"
+
+# The feature names on their own, for merging into a list that an application
+# (or the user) already carries, and for taking them back out again.
 MCA_FEATURE="MiddleClickAutoscroll"
+MCA_BROWSER_FEATURES="MiddleClickAutoscroll,HeliumMiddleClickAutoscroll"
+
+# Bumped when the flags above change, and when what gets written where does.
+# An installation that was set up by a version with a different answer is taken
+# back and done again once, because a file that is already patched is otherwise
+# left alone. See mca_apply.
+#
+# 3 is what takes -noverifyfiles back out of the Steam entries an older version
+# put it in.
+MCA_FLAG_SCHEME=3
 
 MCA_LIBDIR="${MCA_LIBDIR:-@LIBDIR@}"
 MCA_LOCALEDIR="${MCA_LOCALEDIR:-@LOCALEDIR@}"
@@ -44,6 +79,29 @@ MCA_BACKUPDIR="${MCA_STATEDIR}/backup"
 # else. See mca_ledger_add.
 MCA_LEDGER="${MCA_STATEDIR}/ledger"
 
+# The folder the desktop itself shows. Nothing in the XDG search path looks at
+# it, so an entry that lives only there is invisible to a scan - and a game
+# shortcut dragged onto the desktop is exactly that.
+#
+# Its name is translated: Schreibtisch, Bureau, Escritorio. The name in use is
+# in the file xdg-user-dirs writes, so it is read rather than guessed, and
+# ~/Desktop is only the fallback for a system that has no such file.
+mca_desktop_folder() {
+	local file="$MCA_XDG_CONFIG/user-dirs.dirs" line dir=''
+
+	if [[ -r $file ]]; then
+		while IFS= read -r line; do
+			[[ $line == XDG_DESKTOP_DIR=* ]] || continue
+			dir="${line#XDG_DESKTOP_DIR=}"
+			dir="${dir%\"}"; dir="${dir#\"}"
+		done < "$file"
+		dir="${dir/#\$HOME/$HOME}"
+	fi
+
+	[[ $dir == /* ]] || dir="$HOME/Desktop"
+	printf '%s\n' "${dir%/}"
+}
+
 # ---------------------------------------------------------------------------
 # Translations
 # ---------------------------------------------------------------------------
@@ -220,9 +278,12 @@ mca_state_write() {
 #   shadow  <generated desktop entry>   <source entry it was generated from>
 #   inplace <edited file>               <basename of its backup copy>
 #   flags   <flag file>                 created | appended | merged
+#   kwin    <kwinrc>                    what EnablePrimarySelection said before
 #
-# `inplace` and `flags` differ in how they are undone: a backup is restored
-# wholesale, a flag file only loses the one line that was added to it.
+# The kinds differ in how they are undone: a backup is restored wholesale, a
+# flag file only loses the one line that was added to it, and kwinrc gets one
+# key written back - it is a file KDE writes to itself, and putting a whole
+# copy of it back would take everything else settled since with it.
 
 mca_ledger_add() {
 	local kind="$1" path="$2" detail="${3:-}"
@@ -235,6 +296,25 @@ mca_ledger_add() {
 	printf '%s\t%s\t%s\n' "$kind" "$path" "$detail" >> "$MCA_LEDGER"
 }
 
+# mca_ledger_has <path>
+# Whether the ledger still knows about that file. Worth asking because the copy
+# kept beside it is named after the path and outlives a ledger that was lost or
+# truncated: a file nothing has a record of any more is one nothing would ever
+# look at again.
+mca_ledger_has() {
+	[[ -f $MCA_LEDGER ]] || return 1
+	awk -F'\t' -v p="$1" '$2 == p { found = 1 } END { exit !found }' "$MCA_LEDGER"
+}
+
+# mca_ledger_detail <path>
+# The third column of that file's line, empty when the ledger has none. What it
+# means is the kind's business; for `kwin` it is the value to put back.
+mca_ledger_detail() {
+	[[ -f $MCA_LEDGER ]] || return 1
+	awk -F'\t' -v p="$1" '$2 == p { d = $3 } END { if (!length(d)) exit 1; print d }' \
+		"$MCA_LEDGER"
+}
+
 mca_ledger_forget() {
 	local path="$1" tmp
 	[[ -f $MCA_LEDGER ]] || return 0

src/lib/config.sh

@@ -144,6 +144,7 @@ mca_config_load() {
 	CFG_STEAM=no;      mca_config_bool PatchSteam       yes && CFG_STEAM=yes
 	CFG_SPOTIFY=no;    mca_config_bool PatchSpotify     yes && CFG_SPOTIFY=yes
 	CFG_WATCH=no;      mca_config_bool WatchNewApps     yes && CFG_WATCH=yes
+	CFG_PASTE=no;      mca_config_bool DisablePaste     yes && CFG_PASTE=yes
 
 	CFG_EXTRA_FLAGS="$(mca_config_get ExtraFlags '')"
 
@@ -154,10 +155,18 @@ mca_config_load() {
 	CFG_SKIP="$(mca_config_get Skip '')"
 }
 
+# mca_flags [kind]
 # The full argument string that gets injected. Kept in one place so the flag
 # file writer and the desktop entry writer cannot drift apart.
+#
+# A browser gets the flag that leaves it without a warning bar; everything else
+# gets the one that works in every Chromium there is. See MCA_FLAG.
 mca_flags() {
+	if [[ ${1:-app} == browser ]]; then
+		printf '%s' "$MCA_BROWSER_FLAG"
+	else
 		printf '%s' "$MCA_FLAG"
+	fi
 	[[ -n ${CFG_EXTRA_FLAGS:-} ]] && printf ' %s' "$CFG_EXTRA_FLAGS"
 	printf '\n'
 }

src/lib/detect.sh

@@ -99,17 +99,6 @@ mca_desktop_dirs() {
 	)
 }
 
-# mca_desktop_get <file> <key>
-# A single value from the [Desktop Entry] group. Desktop Action groups repeat
-# the same keys, and reading past the first group would pick up the wrong one.
-mca_desktop_get() {
-	local file="$1" key="$2"
-	awk -v key="$key" '
-		/^[[:space:]]*\[/ { inentry = ($0 ~ /^[[:space:]]*\[Desktop Entry\][[:space:]]*$/); next }
-		inentry && index($0, key "=") == 1 { print substr($0, length(key) + 2); exit }
-	' "$file" 2>/dev/null
-}
-
 # _mca_desktop_read <file>
 # Every key the scan needs, in one pass and without a single fork. There are a
 # couple of hundred desktop entries on an ordinary system, and doing this with
@@ -231,10 +220,63 @@ mca_exec_is_steam_link() {
 	local line="$1" prog="$2"
 
 	[[ $line == *steam://* ]] || return 1
-	case "${prog##*/}" in
-		steam|steam-runtime) return 0 ;;
+	mca_prog_is_steam "$prog"
+}
+
+# _mca_prog_is_steam_name <program>
+# The launcher under one of the names Valve and the distributions give it.
+_mca_prog_is_steam_name() {
+	case "${1##*/}" in
+		steam|steam-runtime|steam-native|steam-jupiter) return 0 ;;
 	esac
-	[[ $prog == flatpak:com.valvesoftware.Steam || $prog == snap:steam ]]
+	return 1
+}
+
+# _mca_prog_is_steam_wrapper <program>
+# Whether a script in front of the client is a way of starting Steam. People
+# put one there to add a switch of their own, and an entry pointing at it is a
+# Steam start like any other - but the script is not named after Steam, so
+# nothing above recognises it.
+#
+# Getting this wrong is worse than it sounds: such a script tends to mention
+# the flag it is there to add, which is one of the markers that say "Chromium"
+# to the hint scan. The entry then ends up being handled as an application and
+# is given the flag on its command line, where Steam ignores it, instead of
+# being handed to the Steam module that knows how to reach the web helper.
+#
+# Only the handover is followed, and only one step of it: the client's own
+# launcher is already recognised by name, so a wrapper in front of it is the
+# whole of what is left.
+_mca_prog_is_steam_wrapper() {
+	local prog="$1" head='' target
+
+	[[ $prog == /* && -f $prog && -r $prog ]] || return 1
+
+	# Two characters, read in the shell: the scan asks this about every program
+	# on the system, and most of them are binaries whose first line is the whole
+	# file.
+	read -r -N 2 head < "$prog" 2>/dev/null || return 1
+	[[ $head == '#!' ]] || return 1
+
+	target="$(_mca_script_target "$prog")" || return 1
+	[[ -n $target ]] || return 1
+	_mca_prog_is_steam_name "$target"
+}
+
+# mca_prog_is_steam <program>
+# Whether running this program starts the Steam client. Every packaging is in
+# here and every name Valve and the distributions give the launcher, because
+# the answer decides whether an entry gets Steam's own switch - and an entry
+# that starts Steam without it undoes the web helper patch on the way up.
+#
+# The program is what a scan leaves behind: an absolute path for a native
+# install, flatpak:<id> or snap:<name> for the other two.
+mca_prog_is_steam() {
+	local prog="$1"
+
+	_mca_prog_is_steam_name "$prog" && return 0
+	[[ $prog == flatpak:com.valvesoftware.Steam || $prog == snap:steam ]] && return 0
+	_mca_prog_is_steam_wrapper "$prog"
 }
 
 # ---------------------------------------------------------------------------
@@ -573,14 +615,6 @@ MCA_PROGS=()      # resolved program, or a Flatpak app id or a snap name
 MCA_KINDS=()      # app | browser | steam | unknown | no
 MCA_PACKAGING=()  # native | flatpak | snap
 
-# The shortcuts Steam writes for single games. Not applications of their own - a
-# game is whatever engine it was built with, and none of those reads a Chromium
-# argument - so they are kept apart from the list rather than listed as
-# something that got switched on. They do start Steam, which is why they are
-# kept at all: the Steam module gives them Steam's own switch.
-MCA_STEAM_LINKS=()       # desktop file id
-MCA_STEAM_LINK_FILES=()  # the entry that is in effect for it
-
 # A scan reads every desktop entry on the system, so the menu does it once and
 # then redraws from what it found. Applying rescans on its own, so nothing else
 # has to remember to invalidate this.
@@ -598,7 +632,6 @@ mca_scan() {
 
 	MCA_IDS=(); MCA_FILES=(); MCA_NAMES=(); MCA_PROGS=(); MCA_KINDS=()
 	MCA_PACKAGING=()
-	MCA_STEAM_LINKS=(); MCA_STEAM_LINK_FILES=()
 
 	# Pass one: read the entries and work out what each of them starts. No
 	# detection yet - that needs a stat per program, and those are collected so
@@ -638,11 +671,12 @@ mca_scan() {
 				prog="snap:$MCA_PROG"
 			fi
 
-			if mca_exec_is_steam_link "$exec_line" "$prog"; then
-				MCA_STEAM_LINKS+=("$id")
-				MCA_STEAM_LINK_FILES+=("$file")
-				continue
-			fi
+			# The shortcuts Steam writes for single games are not
+			# applications of their own - a game is whatever engine it was
+			# built with, and none of those reads a Chromium argument - and
+			# starting the client through one needs nothing on its command
+			# line either.
+			mca_exec_is_steam_link "$exec_line" "$prog" && continue
 
 			c_ids+=("$id"); c_files+=("$file"); c_names+=("$name")
 			c_progs+=("$prog")
@@ -664,10 +698,13 @@ mca_scan() {
 		packaging=native
 
 		if [[ $prog == flatpak:* ]]; then
-			prog="${prog#flatpak:}"
 			packaging=flatpak
-			mca_flatpak_is_chromium "$prog" \
-				&& { (( c_browser[i] )) && kind=browser || kind=app; }
+			if mca_prog_is_steam "$prog"; then
+				kind=steam
+			elif mca_flatpak_is_chromium "${prog#flatpak:}"; then
+				(( c_browser[i] )) && kind=browser || kind=app
+			fi
+			prog="${prog#flatpak:}"
 		elif [[ $prog == snap:* ]]; then
 			prog="${prog#snap:}"
 			packaging=snap
@@ -676,7 +713,7 @@ mca_scan() {
 			elif mca_snap_is_chromium "$prog"; then
 				(( c_browser[i] )) && kind=browser || kind=app
 			fi
-		elif [[ ${prog##*/} == steam || ${prog##*/} == steam-runtime ]]; then
+		elif mca_prog_is_steam "$prog"; then
 			# Steam is Chromium inside, but nothing about it can be changed
 			# from a command line argument; it has its own module.
 			kind=steam

src/lib/kde.sh

@@ -0,0 +1,167 @@
+# shellcheck shell=bash
+#
+# KDE's middle-click paste.
+#
+# Inside a Chromium application the flag settles this on its own: with
+# autoscroll on, Blink stops pasting the primary selection on middle click,
+# because the button is doing something else now. Everywhere else on the
+# desktop middle click goes on pasting, which is the behaviour this whole
+# program exists to get away from - so the desktop's own switch for it is
+# turned off too.
+#
+# KWin has such a switch, and only for a Wayland session, where the paste is a
+# protocol the compositor either offers or does not:
+#
+#   ~/.config/kwinrc, [Wayland], EnablePrimarySelection=false
+#
+# On X11 there is nothing to switch. The primary selection is part of X itself
+# and every toolkit reaches for it on its own; no one place can say no.
+#
+# KWin reads the key once, while it starts, so what is written here is true
+# from the next login on rather than straight away.
+
+MCA_KWINRC="${MCA_XDG_CONFIG}/kwinrc"
+MCA_KWIN_GROUP="Wayland"
+MCA_KWIN_KEY="EnablePrimarySelection"
+
+# The kconfig command line tools, whichever generation this session has. They
+# are what System Settings writes kwinrc with, and worth the fork: the file has
+# a cascade behind it - /etc/xdg, the kdedefaults directory - and entries a
+# distribution can mark immutable, and an edit that reaches past all that with
+# sed writes something KDE goes on to ignore.
+MCA_KDE_TOOL=''
+MCA_KDE_TOOL_LOOKED=0
+
+_mca_kde_tool() {
+	local gen
+
+	if (( ! MCA_KDE_TOOL_LOOKED )); then
+		MCA_KDE_TOOL_LOOKED=1
+		for gen in 6 5; do
+			if mca_have "kreadconfig$gen" && mca_have "kwriteconfig$gen"; then
+				MCA_KDE_TOOL="$gen"
+				break
+			fi
+		done
+	fi
+
+	[[ -n $MCA_KDE_TOOL ]] || return 1
+	printf '%s\n' "$MCA_KDE_TOOL"
+}
+
+# mca_kde_session
+# Whether this is a KWin Wayland session.
+mca_kde_session() {
+	local desktop="${XDG_CURRENT_DESKTOP:-}"
+
+	# The watcher is a systemd service, and one started before the session
+	# imported its environment sees none of these variables. A running
+	# kwin_wayland answers both halves of the question at once, and is what
+	# such a run ends up going by.
+	if [[ -z $desktop && -z ${KDE_FULL_SESSION:-} ]]; then
+		mca_have pgrep || return 1
+		pgrep -u "$(id -u)" -x kwin_wayland > /dev/null 2>&1
+		return
+	fi
+
+	# XDG_CURRENT_DESKTOP is the one every desktop sets, and the one to go by
+	# wherever it is set; KDE_FULL_SESSION is what answers when it is not.
+	[[ -z $desktop || ${desktop^^} == *KDE* ]] || return 1
+
+	[[ ${XDG_SESSION_TYPE:-} == wayland || -n ${WAYLAND_DISPLAY:-} ]]
+}
+
+mca_kde_available() {
+	mca_kde_session && _mca_kde_tool > /dev/null
+}
+
+# mca_kde_read [file]
+# What the key says now, lowercased, empty when it is not set at all.
+mca_kde_read() {
+	local file="${1:-$MCA_KWINRC}" gen val
+	gen="$(_mca_kde_tool)" || return 1
+
+	# kreadconfig creates the file it is pointed at, and the status screen -
+	# which asks on every redraw - has no business writing anything. A file
+	# that is not there has no value in it to read anyway.
+	[[ -f $file ]] || return 0
+
+	val="$("kreadconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+		--key "$MCA_KWIN_KEY" 2>/dev/null)"
+	printf '%s\n' "${val,,}"
+}
+
+# mca_kde_write [file] <value>
+# An empty value takes the key back out rather than writing nothing into it -
+# a key that is missing and a key that says nothing are not the same thing to
+# KDE, and only the first one is what an untouched kwinrc looks like.
+mca_kde_write() {
+	local file="$1" value="$2" gen
+	gen="$(_mca_kde_tool)" || return 1
+
+	if [[ -z $value ]]; then
+		"kwriteconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+			--key "$MCA_KWIN_KEY" --delete 2>/dev/null
+	else
+		"kwriteconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+			--key "$MCA_KWIN_KEY" "$value" 2>/dev/null
+	fi
+}
+
+# mca_kde_paste_apply
+# Turns the paste off, and remembers what the key said before so that undoing
+# puts that back rather than a guess.
+#
+# A key that already says false without the ledger knowing about it was set by
+# the user or by the distribution. That one is left alone and nothing is
+# recorded, so `disable` cannot switch a paste back on that this program never
+# switched off.
+mca_kde_paste_apply() {
+	local current previous changed=0
+
+	mca_kde_available || return 1
+	current="$(mca_kde_read)" || return 1
+
+	if mca_ledger_has "$MCA_KWINRC"; then
+		# Ours already. What goes back is the value recorded the first time
+		# round, not what reading the file now would say - that is false, and
+		# false is what is being undone.
+		previous="$(mca_ledger_detail "$MCA_KWINRC")" || previous=unset
+	elif [[ $current == false ]]; then
+		return 0
+	else
+		previous="${current:-unset}"
+	fi
+
+	if [[ $current != false ]]; then
+		mca_kde_write "$MCA_KWINRC" false || return 1
+		MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+		changed=1
+	fi
+
+	mca_ledger_add kwin "$MCA_KWINRC" "$previous"
+
+	(( changed )) && mca_note "$(mca_msg "Middle click stops pasting at the next login.")"
+	return 0
+}
+
+# mca_kde_paste_revert <file> <previous value>
+mca_kde_paste_revert() {
+	local file="$1" previous="$2"
+
+	_mca_kde_tool > /dev/null || return 1
+	[[ -f $file ]] || return 1
+
+	# Only what is still recognisably ours. A key somebody has since put a
+	# value of their own into is theirs now.
+	[[ "$(mca_kde_read "$file")" == false ]] || return 1
+
+	[[ $previous == unset ]] && previous=''
+	mca_kde_write "$file" "$previous" || return 1
+
+	# Nothing was in the file but the key, which means there was no file before
+	# this program wrote one. An empty kwinrc says nothing that its absence
+	# does not say better.
+	[[ -s $file ]] || rm -f -- "$file"
+	return 0
+}

src/lib/menu.sh

@@ -178,9 +178,6 @@ mca_ui_status() {
 	if mca_steam_installed; then
 		if mca_steam_patched; then
 			_mca_row "$(mca_msg "Steam")" "$(_mca_onoff yes)"
-		elif [[ $CFG_STEAM == yes && $CFG_ENABLED == yes ]] && mca_steam_waiting; then
-			_mca_row "$(mca_msg "Steam")" \
-				"${MCA_C_DIM}$(mca_msg "waiting until Steam is closed")${MCA_C_RESET}"
 		elif [[ $CFG_STEAM == yes && $CFG_ENABLED == yes ]]; then
 			_mca_row "$(mca_msg "Steam")" \
 				"${MCA_C_YELLOW}$(mca_msg "not patched yet")${MCA_C_RESET}"
@@ -197,6 +194,18 @@ mca_ui_status() {
 		fi
 	fi
 
+	# Not an ON/OFF like the rows around it: what is being reported is the state
+	# of the paste, not of a switch, and off is the state this program is after.
+	if mca_kde_available; then
+		if [[ "$(mca_kde_read)" == false ]]; then
+			_mca_row "$(mca_msg "Middle-click paste")" \
+				"${MCA_C_GREEN}$(mca_msg "off")${MCA_C_RESET}"
+		else
+			_mca_row "$(mca_msg "Middle-click paste")" \
+				"${MCA_C_DIM}$(mca_msg "on")${MCA_C_RESET}"
+		fi
+	fi
+
 	_mca_row "$(mca_msg "Last applied")" "$(mca_time_ago "$last")"
 
 	if [[ $CFG_ENABLED == yes ]]; then
@@ -219,6 +228,7 @@ MCA_SETTINGS=(
 	"PatchAutostart|bool|yes|Programs that start themselves at login"
 	"PatchSteam|bool|yes|Steam"
 	"PatchSpotify|bool|yes|Spotify"
+	"DisablePaste|bool|yes|Turn off KDE's middle-click paste"
 	"WatchNewApps|bool|yes|Apply to newly installed applications"
 	"ExtraFlags|text||Additional Chromium arguments"
 )

src/lib/patch.sh

@@ -29,6 +29,40 @@
 MCA_MARK_BEGIN='# >>> middleclick-autoscroll'
 MCA_MARK_END='# <<< middleclick-autoscroll'
 
+# ---------------------------------------------------------------------------
+# Feature lists
+# ---------------------------------------------------------------------------
+# Both --enable-features and --enable-blink-features take a comma separated
+# list, and Chromium keeps the last one it is given and drops the rest. A
+# second one of the same kind would therefore silently switch off whatever the
+# first one turned on, so an option that is already there is extended instead.
+
+# _mca_list_merge <list> <wanted>
+# The two lists as one, in the order they came and without repeating anything.
+_mca_list_merge() {
+	local out="$1" item
+	for item in ${2//,/ }; do
+		[[ ",$out," == *",$item,"* ]] && continue
+		out="${out:+$out,}$item"
+	done
+	printf '%s' "$out"
+}
+
+# _mca_list_strip <list> <unwanted>
+# The list without any of the named entries.
+_mca_list_strip() {
+	local out='' item
+	for item in ${1//,/ }; do
+		[[ ",$2," == *",$item,"* ]] && continue
+		out="${out:+$out,}$item"
+	done
+	printf '%s' "$out"
+}
+
+# The two options, as a regular expression branch, for the places that have to
+# recognise either of them.
+MCA_FEATURE_OPTS='--enable-blink-features|--enable-features'
+
 # ---------------------------------------------------------------------------
 # Command lines
 # ---------------------------------------------------------------------------
@@ -70,28 +104,32 @@ _mca_exec_after_program() {
 # Prints nothing and returns 1 when there was nothing to change, so callers can
 # tell a real edit from a no-op without diffing.
 #
-# An --enable-blink-features that is already there is extended rather than
-# repeated: Chromium keeps the last occurrence of the option and drops the
-# rest, so a second one would silently disable whatever the first turned on.
+# A feature list that is already on the line is extended rather than repeated.
+# See _mca_list_merge.
 mca_exec_inject() {
 	local line="$1" flagstr="${2:-}" where="${3:-before-fields}"
-	local flag value existing at changed=0
+	local flag opt value existing merged re at changed=0
 	local -a flags
 
 	[[ -n $flagstr ]] || flagstr="$(mca_flags)"
 	read -r -a flags <<< "$flagstr"
 
 	for flag in "${flags[@]}"; do
-		if [[ $flag == --enable-blink-features=* ]]; then
-			value="${flag#--enable-blink-features=}"
-			if [[ $line =~ --enable-blink-features=([A-Za-z0-9,_-]*) ]]; then
-				existing="${BASH_REMATCH[1]}"
-				[[ ",$existing," == *",$value,"* ]] && continue
-				line="${line/--enable-blink-features=$existing/--enable-blink-features=${existing:+$existing,}$value}"
+		case "$flag" in
+			--enable-blink-features=*|--enable-features=*)
+				opt="${flag%%=*}"
+				value="${flag#*=}"
+				re="(^|[[:space:]])$opt=([^[:space:]]*)"
+				if [[ $line =~ $re ]]; then
+					existing="${BASH_REMATCH[2]}"
+					merged="$(_mca_list_merge "$existing" "$value")"
+					[[ $merged == "$existing" ]] && continue
+					line="${line/$opt=$existing/$opt=$merged}"
 					changed=1
 					continue
 				fi
-		fi
+				;;
+		esac
 
 		[[ " $line " == *" $flag "* ]] && continue
 
@@ -117,12 +155,12 @@ mca_exec_inject() {
 # Flag files
 # ---------------------------------------------------------------------------
 
-# mca_flags_apply <program>
+# mca_flags_apply <program> [kind]
 # Writes the flags into the file the program's launcher reads. Returns 0 when
 # the program has such a file (whether or not anything needed changing), 1 when
 # it has none and the desktop entry route has to be used instead.
 mca_flags_apply() {
-	local prog="$1" name target='' existing_target=''
+	local prog="$1" kind="${2:-app}" name target='' existing_target=''
 	local -a candidates=()
 
 	mapfile -t candidates < <(mca_flags_candidates "$prog" | awk '!seen[$0]++')
@@ -133,7 +171,7 @@ mca_flags_apply() {
 	for name in "${candidates[@]}"; do
 		if [[ -f "$MCA_XDG_CONFIG/$name" ]]; then
 			existing_target="$name"
-			_mca_flags_write "$MCA_XDG_CONFIG/$name"
+			_mca_flags_write "$MCA_XDG_CONFIG/$name" "$kind"
 		fi
 	done
 	[[ -n $existing_target ]] && return 0
@@ -143,19 +181,21 @@ mca_flags_apply() {
 	# creating that one also covers every other application using the same
 	# shared Electron.
 	target="${candidates[-1]}"
-	_mca_flags_write "$MCA_XDG_CONFIG/$target"
+	_mca_flags_write "$MCA_XDG_CONFIG/$target" "$kind"
 	return 0
 }
 
-# _mca_flags_write <file>
-# Adds the flags as a marked block, or merges into an --enable-blink-features
-# line that is already in the file.
+# _mca_flags_write <file> [kind]
+# Adds the flags as a marked block, or merges into a feature list that is
+# already in the file.
 _mca_flags_write() {
-	local file="$1" content='' line flag value existing merged=0 block=''
+	local file="$1" kind="${2:-app}"
+	local content='' line flag opt want existing merged=0 block=''
 	local -a flags
+	local -A merged_opts=()
 	local created=0
 
-	read -r -a flags <<< "$(mca_flags)"
+	read -r -a flags <<< "$(mca_flags "$kind")"
 
 	[[ -f $file ]] || created=1
 	if (( ! created )); then
@@ -166,24 +206,31 @@ _mca_flags_write() {
 		fi
 	fi
 
-	# Merge into a blink-features line the user (or a distribution) put there.
-	if [[ $content == *--enable-blink-features=* ]]; then
+	# Merge into a feature list the user (or a distribution) put there, rather
+	# than write a second line of the same option further down.
+	if [[ $content == *--enable-* ]]; then
 		local out=''
 		while IFS= read -r line; do
-			if [[ $line =~ ^[[:space:]]*--enable-blink-features=([A-Za-z0-9,_-]*)[[:space:]]*$ ]]; then
-				existing="${BASH_REMATCH[1]}"
-				if [[ ",$existing," != *",$MCA_FEATURE,"* ]]; then
-					line="--enable-blink-features=${existing:+$existing,}$MCA_FEATURE"
-				fi
+			if [[ $line =~ ^[[:space:]]*($MCA_FEATURE_OPTS)=([^[:space:]]*)[[:space:]]*$ ]]; then
+				opt="${BASH_REMATCH[1]}"
+				existing="${BASH_REMATCH[2]}"
+				want=''
+				for flag in "${flags[@]}"; do
+					[[ $flag == "$opt="* ]] && want="${flag#*=}"
+				done
+				if [[ -n $want ]]; then
+					line="$opt=$(_mca_list_merge "$existing" "$want")"
+					merged_opts["$opt"]=1
 					merged=1
 				fi
+			fi
 			out+="$line"$'\n'
 		done <<< "$content"
 		content="${out%$'\n'}"
 	fi
 
 	for flag in "${flags[@]}"; do
-		(( merged )) && [[ $flag == --enable-blink-features=* ]] && continue
+		[[ -n ${merged_opts["${flag%%=*}"]:-} ]] && continue
 		block+="$flag"$'\n'
 	done
 
@@ -218,7 +265,7 @@ _mca_flags_drop_block() {
 
 # mca_flags_revert <file> <detail>
 mca_flags_revert() {
-	local file="$1" detail="$2" content line out='' existing new
+	local file="$1" detail="$2" content line out='' opt existing new
 
 	[[ -f $file ]] || return 0
 
@@ -238,12 +285,13 @@ mca_flags_revert() {
 
 	if [[ $detail == merged* ]]; then
 		while IFS= read -r line; do
-			if [[ $line =~ ^[[:space:]]*--enable-blink-features=([A-Za-z0-9,_-]*)[[:space:]]*$ ]]; then
-				existing="${BASH_REMATCH[1]}"
-				new="${existing//$MCA_FEATURE/}"
-				new="${new//,,/,}"; new="${new#,}"; new="${new%,}"
+			if [[ $line =~ ^[[:space:]]*($MCA_FEATURE_OPTS)=([^[:space:]]*)[[:space:]]*$ ]]; then
+				opt="${BASH_REMATCH[1]}"
+				existing="${BASH_REMATCH[2]}"
+				# Either name, whichever version of this program put it there.
+				new="$(_mca_list_strip "$existing" "$MCA_BROWSER_FEATURES")"
 				[[ -z $new ]] && continue
-				line="--enable-blink-features=$new"
+				line="$opt=$new"
 			fi
 			out+="$line"$'\n'
 		done <<< "$content"
@@ -349,51 +397,120 @@ mca_desktop_apply() {
 }
 
 # ---------------------------------------------------------------------------
-# Autostart entries
+# Entries outside the search path
 # ---------------------------------------------------------------------------
-# Applications that start themselves at login write their own entry into
-# ~/.config/autostart, pointing straight at their binary. Those bypass the
-# desktop entry in the menu completely, which is why Discord launched at login
-# used to behave differently from Discord launched from the menu.
+# Two directories hold desktop entries that no part of the XDG search path
+# looks at, so nothing the scan does can reach them:
 #
-# Steam is here too, even though it is not a Chromium process itself: its entry
-# needs -noverifyfiles exactly like the menu one, and it is the entry most
-# likely to exist, because Steam writes it as soon as "run at startup" is
-# ticked. Without it, a Steam started at login restores the patched web helper
-# script and the watcher patches it back, over and over.
+#   ~/.config/autostart, where applications that start themselves at login
+#   write their own entry, pointing straight at their binary. Those bypass the
+#   entry in the menu completely, which is why Discord launched at login used
+#   to behave differently from Discord launched from the menu.
+#
+#   The desktop folder, where a shortcut somebody dragged out of the menu -
+#   or asked Steam for - lives and nowhere else.
+#
+# Neither can be shadowed from anywhere, so both are edited where they stand,
+# with the original kept.
+
+# _mca_entry_patch_inplace <file> <gate: autostart|apps>
+# One desktop entry that lives outside the XDG search path, edited where it is
+# because there is nowhere to shadow it from.
+#
+# What decides whether an application here is in scope differs by where the
+# entry came from, which is what the gate says: an autostart entry follows the
+# autostart setting, a shortcut follows the same rules as the application it is
+# a shortcut to.
+_mca_entry_patch_inplace() {
+	local file="$1" gate="$2"
+	local id prog packaging=native content backup kind copy
+
+	# Already ours, and normally that is the end of it: what is in there is what
+	# this version put there. Not so for a file the ledger has no record of -
+	# nothing would ever look at that one again, neither the undo a change of
+	# flags goes through nor this, which leaves a marked file alone, and it would
+	# keep an answer from an older version for good. The copy taken before the
+	# edit is named after the path and is still there, so the file goes back to
+	# what it was and is written again below.
+	if grep -q "^$MCA_MARK_INPLACE=" "$file" 2>/dev/null; then
+		mca_ledger_has "$file" && return 0
+		copy="$MCA_BACKUPDIR/$(mca_backup_name "$file")"
+		[[ -f $copy ]] || return 0
+		cp -p -- "$copy" "$file" 2>/dev/null || return 0
+	fi
+
+	_mca_desktop_read "$file"
+	[[ -n $DE_EXEC ]] || return 0
+	[[ $DE_HIDDEN == true ]] && return 0
+
+	mca_exec_program "$DE_EXEC" || return 0
+	prog="$MCA_PROG"
+
+	# A Flatpak or a snap entry names the wrapper rather than the application.
+	# The scan resolves those into an id; outside the scan the same has to
+	# happen here, or every Flatpak looks like the flatpak program itself.
+	if [[ ${prog##*/} == flatpak ]]; then
+		mca_exec_flatpak_id "$DE_EXEC" || return 0
+		prog="flatpak:$MCA_PROG"
+		packaging=flatpak
+	elif mca_snap_name "$prog"; then
+		prog="snap:$MCA_PROG"
+		packaging=snap
+	fi
+
+	# An entry that starts Steam is left where it is. Steam takes nothing
+	# from a command line that would help, and what it does take belongs to
+	# the web helper script in its own installation.
+	mca_prog_is_steam "$prog" && return 0
+
+	case "$packaging" in
+		flatpak) mca_flatpak_is_chromium "${prog#flatpak:}" || return 0 ;;
+		snap)    mca_snap_is_chromium "${prog#snap:}" || return 0 ;;
+		*)       mca_is_chromium "$prog" || return 0 ;;
+	esac
+
+	mca_desktop_is_browser && kind=browser || kind=app
+
+	if [[ $gate == autostart ]]; then
+		[[ $CFG_AUTOSTART == yes ]] || return 0
+	else
+		id="${file##*/}"; id="${id%.desktop}"
+		mca_kind_wanted "$kind" "$id" "$packaging" || return 0
+	fi
+
+	content="$(_mca_desktop_transform "$file" "$MCA_MARK_INPLACE" \
+		"$(mca_flags "$kind")")"
+
+	[[ -n $content ]] || return 0
+	[[ "$content" == "$(< "$file")" ]] && return 0
+
+	backup="$(mca_backup "$file")" || return 0
+	if mca_write_if_changed "$file" "$content"$'\n'; then
+		MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+	fi
+	mca_ledger_add inplace "$file" "$backup"
+}
 
 mca_autostart_apply() {
-	local dir="$MCA_XDG_CONFIG/autostart" file exec_line prog content backup
+	local dir="$MCA_XDG_CONFIG/autostart" file
 
 	[[ -d $dir ]] || return 0
 
 	for file in "$dir"/*.desktop; do
 		[[ -f $file ]] || continue
-		grep -q "^$MCA_MARK_INPLACE=" "$file" 2>/dev/null && continue
+		_mca_entry_patch_inplace "$file" autostart
+	done
+}
 
-		exec_line="$(mca_desktop_get "$file" Exec)"
-		[[ -n $exec_line ]] || continue
+mca_shortcuts_apply() {
+	local dir file
+	dir="$(mca_desktop_folder)"
 
-		mca_exec_program "$exec_line" || continue
-		prog="$MCA_PROG"
+	[[ -d $dir ]] || return 0
 
-		if [[ ${prog##*/} == steam || ${prog##*/} == steam-runtime ]]; then
-			[[ $CFG_STEAM == yes ]] || continue
-			content="$(_mca_desktop_transform "$file" "$MCA_MARK_INPLACE" \
-				"$MCA_STEAM_LAUNCH_FLAG" after-program)"
-		else
-			[[ $CFG_AUTOSTART == yes ]] || continue
-			mca_is_chromium "$prog" || continue
-			content="$(_mca_desktop_transform "$file" "$MCA_MARK_INPLACE")"
-		fi
-		[[ -n $content ]] || continue
-		[[ "$content" == "$(< "$file")" ]] && continue
-
-		backup="$(mca_backup "$file")" || continue
-		if mca_write_if_changed "$file" "$content"$'\n'; then
-			MCA_CHANGES=$(( MCA_CHANGES + 1 ))
-		fi
-		mca_ledger_add inplace "$file" "$backup"
+	for file in "$dir"/*.desktop; do
+		[[ -f $file ]] || continue
+		_mca_entry_patch_inplace "$file" apps
 	done
 }
 
@@ -446,13 +563,15 @@ mca_spotify_apply() {
 # ---------------------------------------------------------------------------
 
 # mca_prune_orphans
-# Removes generated entries whose application is gone.
+# Forgets changes there is no longer anything to undo.
 #
 # Uninstalling something deletes its entry from /usr/share/applications, but the
 # copy shadowing it is in the user's home and pacman knows nothing about it. It
 # would sit in the menu forever, offering to start a program that is no longer
 # installed - and the watcher would not notice, because a plain apply only ever
-# looks at what is there now.
+# looks at what is there now. A file that was edited where it stood and has
+# since been deleted is the same problem from the other side: its record would
+# have `disable` put the file back.
 mca_prune_orphans() {
 	local kind path source line
 	local -a lines=()
@@ -462,6 +581,17 @@ mca_prune_orphans() {
 
 	for line in "${lines[@]}"; do
 		IFS=$'\t' read -r kind path source <<< "$line"
+
+		# An entry that was edited where it stood and has since been deleted -
+		# a game shortcut dragged to the wastebasket, an autostart entry the
+		# application removed. There is nothing left to put back, and keeping
+		# the record would have `disable` recreate a file the user threw away.
+		if [[ $kind == inplace && ! -e $path ]]; then
+			[[ -n $source ]] && rm -f -- "$MCA_BACKUPDIR/$source"
+			mca_ledger_forget "$path"
+			continue
+		fi
+
 		[[ $kind == shadow && -n $source ]] || continue
 		[[ -e $source ]] && continue
 
@@ -516,6 +646,10 @@ mca_revert_all() {
 				mca_steam_revert "$path" "$detail" \
 					&& MCA_CHANGES=$(( MCA_CHANGES + 1 ))
 				;;
+			kwin)
+				mca_kde_paste_revert "$path" "$detail" \
+					&& MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+				;;
 		esac
 	done < <(tac "$MCA_LEDGER" 2>/dev/null)
 

src/lib/steam.sh

@@ -10,24 +10,27 @@
 #   ~/.local/share/Steam/ubuntu12_64/steamwebhelper_sniper_wrap.sh
 #
 # Steam compares the installed files against its manifest at every start - by
-# size, not by content - and restores whatever differs, which is why the
-# launcher gets -noverifyfiles as well. The trade-off is real and belongs to
-# the user, so this is a switch of its own rather than part of the general
-# application handling: with verification off, Steam no longer repairs a
-# damaged installation by itself.
+# size and timestamp rather than by content - and restores whatever differs.
+# So the patch is written to look untouched: the bytes the flag costs are taken
+# back out of the script's comments and the timestamp is put back afterwards,
+# which leaves a file that is byte-for-byte the size Steam recorded and as old
+# as Steam left it. A client that verifies its files finds nothing to repair
+# and the flag survives however Steam was started - from the menu, from a game
+# shortcut, from a launcher like Heroic, from a terminal.
 #
-# Every way of starting Steam has to carry that switch, or the two programs
-# spend the session undoing each other: Steam restores the script, the watcher
-# patches it again, Steam restores it again, and the client never gets past its
-# update dialog. So the autostart entry gets it as well as the menu one (see
-# mca_autostart_apply), and the patch below stays out of the way of a client
-# that is already running.
+# A patch that changes the length is not an option, and no switch covers for
+# one. Steam checks its files at a start it was given arguments for, but also
+# at the shutdown it runs itself - and that one has no -noverifyfiles on its
+# command line, whatever the session was started with. What a single wrong
+# length costs is the whole client package downloaded, extracted and installed
+# again, and a client that quits at the end of it instead of coming up. So the
+# flag either fits in the space the comments give back, or it is not written at
+# all: no autoscroll in the interface is a smaller thing than a client that
+# reinstalls itself.
 #
 # The file comes back on every client update, and the watcher re-applies the
 # patch when that happens.
 
-MCA_STEAM_LAUNCH_FLAG='-noverifyfiles'
-
 # Every place a Steam installation is known to live, resolved and de-duplicated
 # because ~/.steam/steam is normally a symlink into ~/.local/share.
 #
@@ -79,24 +82,6 @@ mca_steam_installed() {
 	return 1
 }
 
-# mca_steam_running
-# Steam records its own process id beside its installation while it runs. The
-# file outlives a crash, so the id is checked rather than believed.
-mca_steam_running() {
-	local f pid
-	for f in \
-		"$HOME/.steam/steam.pid" \
-		"$HOME/.var/app/com.valvesoftware.Steam/.steam/steam.pid" \
-		"$HOME/snap/steam/common/.steam/steam.pid"
-	do
-		[[ -r $f ]] || continue
-		pid="$(< "$f")"
-		[[ $pid =~ ^[0-9]+$ ]] || continue
-		kill -0 "$pid" 2>/dev/null && return 0
-	done
-	return 1
-}
-
 # mca_steam_script_patched <script>
 mca_steam_script_patched() {
 	grep -q -- "$MCA_FEATURE" "$1" 2>/dev/null
@@ -111,26 +96,6 @@ mca_steam_patched() {
 	return 1
 }
 
-# mca_steam_deferred <script>
-# Whether the patch is being held back rather than simply missing: the script
-# was patched before, its own copy is back, and Steam is still running. See
-# mca_steam_apply for why that is left alone.
-mca_steam_deferred() {
-	[[ -e "$MCA_BACKUPDIR/$(mca_backup_name "$1")" ]] && mca_steam_running
-}
-
-# mca_steam_waiting
-# The same question for the status screen, which has no script in hand.
-mca_steam_waiting() {
-	local root script
-	while IFS= read -r root; do
-		script="$(mca_steam_script "$root")" || continue
-		mca_steam_script_patched "$script" && continue
-		mca_steam_deferred "$script" && return 0
-	done < <(mca_steam_roots)
-	return 1
-}
-
 # _mca_steam_exec_line <script>
 # The line number of the command that starts the web helper: the last
 # uncommented line that both names steamwebhelper and forwards "$@". Both the
@@ -145,12 +110,116 @@ _mca_steam_exec_line() {
 	' "$1" 2>/dev/null
 }
 
+# _mca_steam_build <script> <flags>
+# The patched script on stdout: the flags appended to the line that starts the
+# web helper, and the same number of bytes taken back out of the script's
+# comments, so that the file Steam finds is the length Steam wrote down.
+# Everything else - setting up the container runtime, deciding whether the
+# sandbox can be used - is left alone.
+#
+# Comments are eaten from the bottom up, so the header that says what the
+# script is for is the last thing to lose anything, and the '#' itself always
+# stays: a line that loses it stops being a comment and starts being a command.
+# Fails when the comments are too short to pay for the flags.
+_mca_steam_build() {
+	local script="$1" flags="$2" lineno need
+
+	lineno="$(_mca_steam_exec_line "$script")"
+	[[ -n $lineno ]] || return 1
+
+	need="$(printf '%s' " $flags" | wc -c)"
+	need="${need//[^0-9]/}"
+
+	# LC_ALL=C so awk counts bytes: a comment with an accent in it is shorter
+	# in characters than it is on disk, and it is the disk that Steam measures.
+	LC_ALL=C awk -v n="$lineno" -v f=" $flags" -v need="$need" '
+		{ lines[NR] = (NR == n ? $0 f : $0) }
+		END {
+			for (i = NR; i >= 2 && need > 0; i--) {
+				if (i == n) continue
+				p = index(lines[i], "#")
+				if (p == 0) continue
+				# Only a line that is nothing but a comment; a trailing one
+				# sits behind a command that has to stay intact.
+				if (substr(lines[i], 1, p - 1) ~ /[^ \t]/) continue
+				can = length(lines[i]) - p
+				if (can <= 0) continue
+				if (can > need) can = need
+				lines[i] = substr(lines[i], 1, length(lines[i]) - can)
+				need -= can
+			}
+			if (need > 0) exit 1
+			for (i = 1; i <= NR; i++) print lines[i]
+		}
+	' "$script"
+}
+
+# _mca_steam_same_size <script> <content>
+# Whether writing that content leaves the file at the size it has now. Measured
+# rather than worked out: a script without a final newline gains one on the way
+# through awk, and one byte is all it takes for Steam to notice.
+_mca_steam_same_size() {
+	local script="$1" content="$2"
+	(( $(wc -c < "$script") == $(printf '%s\n' "$content" | wc -c) ))
+}
+
+# _mca_steam_refresh_backup <script>
+# A client update brings a new version of the script, and the copy kept from
+# before it is no longer what putting it back means. Only ever done while the
+# script is unpatched, so the copy that replaces it is Steam's own.
+_mca_steam_refresh_backup() {
+	local script="$1" name
+	name="$(mca_backup_name "$script")"
+
+	[[ -e "$MCA_BACKUPDIR/$name" ]] || return 0
+	cmp -s -- "$script" "$MCA_BACKUPDIR/$name" && return 0
+	cp -p -- "$script" "$MCA_BACKUPDIR/$name" 2>/dev/null || true
+}
+
+# _mca_steam_settle <script> <flags>
+# The script is already patched. Whether that is a patch Steam can live with is
+# a question of length: an earlier version of this program appended the flag
+# where the comments could not pay for it, which leaves the script longer than
+# the file Steam wrote down - and a client that checks its files reinstalls
+# itself over that, then quits instead of starting.
+#
+# Rebuilt from the untouched original kept when the script was first patched,
+# never from the patched file, the flag either fits this time or the original
+# goes back and Steam is left with a client it recognises.
+_mca_steam_settle() {
+	local script="$1" flags="$2" name copy out
+
+	name="$(mca_backup_name "$script")"
+	copy="$MCA_BACKUPDIR/$name"
+
+	# Nothing to compare against, so nothing can be said about the length.
+	[[ -f $copy ]] || return 0
+
+	# Already the length Steam expects: the patch is a good one.
+	(( $(wc -c < "$script") == $(wc -c < "$copy") )) && return 0
+
+	if out="$(_mca_steam_build "$copy" "$flags")" && _mca_steam_same_size "$copy" "$out"; then
+		if mca_write_if_changed "$script" "$out"$'\n'; then
+			MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+		fi
+		chmod +x -- "$script" 2>/dev/null || true
+		touch -r "$copy" -- "$script" 2>/dev/null || true
+		mca_ledger_add steam "$script" "$name"
+		return 0
+	fi
+
+	mca_steam_revert "$script" "$name"
+	mca_ledger_forget "$script"
+	mca_note "$(mca_msg "Steam's interface cannot be given the flag without leaving a file Steam would reinstall; the change has been taken back.")"
+	return 0
+}
+
 # mca_steam_apply
-# Appends the flags to the line that starts the web helper. Everything else in
-# the script - setting up the container runtime, deciding whether the sandbox
-# can be used - is left alone.
+# Puts the flags into every Steam installation that has the script, and only
+# where that can be done without changing how long the file is. Returns 1 when
+# there is no Steam to patch at all.
 mca_steam_apply() {
-	local root script backup flags lineno found=0 out
+	local root script backup flags found=0 out
 
 	flags="$(mca_flags)"
 
@@ -158,34 +227,37 @@ mca_steam_apply() {
 		script="$(mca_steam_script "$root")" || continue
 		found=1
 
-		mca_steam_script_patched "$script" && continue
-
-		# Not patched now, but patched before: Steam has just put its own copy
-		# back. Patching it again while the client watches is what turns one
-		# size mismatch into an endless update dialog, and it would not help
-		# this session anyway - the helper is started once, at the start. The
-		# patch waits for the next apply with Steam closed.
-		if mca_steam_deferred "$script"; then
-			mca_note "$(mca_msg "Steam is running and has put its own file back; the change waits until Steam is closed.")"
+		if mca_steam_script_patched "$script"; then
+			_mca_steam_settle "$script" "$flags"
 			continue
 		fi
 
-		lineno="$(_mca_steam_exec_line "$script")"
-		if [[ -z $lineno ]]; then
-			# A client update changed how the helper is started. Leaving the
-			# file alone is the only safe answer: this script is what starts
-			# Steam's entire interface.
-			mca_note "$(mca_msg "Steam starts its interface in a way this version does not recognise; leaving it alone.")"
+		_mca_steam_refresh_backup "$script"
+
+		# Either the comments can pay for the flag or nothing is written.
+		# A longer file is one Steam reinstalls itself over; a client update
+		# that changed how the helper is started leaves no line to patch at
+		# all. Both end here, and this script is what starts Steam's entire
+		# interface, so leaving it alone is the only safe answer to either.
+		if ! { out="$(_mca_steam_build "$script" "$flags")" \
+			&& _mca_steam_same_size "$script" "$out"; }
+		then
+			mca_note "$(mca_msg "Steam starts its interface in a way this version cannot change without Steam noticing; leaving it alone.")"
 			continue
 		fi
 
-		out="$(awk -v n="$lineno" -v f=" $flags" 'NR == n { $0 = $0 f } { print }' "$script")" || continue
-
 		backup="$(mca_backup "$script")" || continue
 		if mca_write_if_changed "$script" "$out"$'\n'; then
 			MCA_CHANGES=$(( MCA_CHANGES + 1 ))
 		fi
 		chmod +x -- "$script" 2>/dev/null || true
+
+		# Steam looks at when the file was last written as well as at how big
+		# it is, and the copy taken before the edit still carries the original
+		# timestamp. Putting it back costs nothing and removes the other half
+		# of what the client would notice.
+		touch -r "$MCA_BACKUPDIR/$backup" -- "$script" 2>/dev/null || true
+
 		mca_ledger_add steam "$script" "$backup"
 	done < <(mca_steam_roots)
 
@@ -213,12 +285,3 @@ mca_steam_revert() {
 	chmod +x -- "$script" 2>/dev/null || true
 	return 0
 }
-
-# mca_steam_desktop_apply <id> <source entry>
-# Steam restores its own files at every start unless it is told not to verify
-# them, so the launcher entry carries that switch. It goes directly after the
-# program because Steam reads its options before the steam:// argument that the
-# right-click actions pass.
-mca_steam_desktop_apply() {
-	mca_desktop_apply "$1" "$2" "$MCA_STEAM_LAUNCH_FLAG" after-program
-}

src/middleclick-autoscroll

@@ -17,7 +17,7 @@ set -uo pipefail
 
 MCA_LIBDIR="${MCA_LIBDIR:-@LIBDIR@}"
 
-for _mod in common config detect patch steam apply menu; do
+for _mod in common config detect patch steam kde apply menu; do
 	# shellcheck source=/dev/null
 	if ! source "$MCA_LIBDIR/$_mod.sh"; then
 		printf 'middleclick-autoscroll: cannot load %s/%s.sh\n' "$MCA_LIBDIR" "$_mod" >&2
@@ -56,10 +56,6 @@ mca_do_enable() {
 
 	mca_ok "$(mca_msg "Autoscroll is on for %d applications." "$MCA_N_ON")"
 
-	if [[ $CFG_STEAM == yes ]] && mca_steam_installed; then
-		mca_note "$(mca_msg "Steam's launcher now skips its file check, which is what keeps the change from being undone at every start.")"
-	fi
-
 	mca_note "$(mca_msg "Applications that are already running pick this up when they are restarted.")"
 }
 
@@ -119,8 +115,12 @@ mca_do_apply() {
 		mca_ok "$(mca_msg "Already applied to %d applications." "$MCA_N_ON")"
 	fi
 
-	if [[ $CFG_WATCH == yes ]] && mca_watch_available && ! mca_watch_enabled; then
+	if [[ $CFG_WATCH == yes ]] && mca_watch_available; then
+		if mca_watch_enabled; then
+			mca_watch_refresh
+		else
 			mca_watch_enable || true
+		fi
 	elif [[ $CFG_WATCH != yes ]] && mca_watch_enabled; then
 		mca_watch_disable
 	fi