chore: 1.5.0

KDE's own middle-click paste is turned off along with everything else. Inside a
Chromium application the flag already settles it - with autoscroll on, Blink
stops pasting the primary selection - but everywhere else on the desktop middle
click goes on pasting, which is the thing this program exists to get away from.

KWin has a switch for it on a Wayland session, where the paste is a protocol
the compositor either offers or does not, and that is what gets written. It is
true from the next login on. What the key said before is recorded, so disable
puts it back, and a key that already said no is left alone and never switched
back on. X11 has no such switch and nothing is written there.

Off under Settings for anyone who wants the paste kept.

Makefile

@@ -8,7 +8,7 @@
 # Overridable so a packager can pass the version it is actually building
 # (`make VERSION=$pkgver`). The literal below is the fallback for builds
 # straight from a checkout, and is what a release tag has to carry.
-VERSION      ?= 1.4.0
+VERSION      ?= 1.5.0
 
 PREFIX       ?= /usr
 DESTDIR      ?=
@@ -23,13 +23,17 @@ MANDIR       ?= $(DATADIR)/man
 # distribution that still keeps /lib separate from /usr/lib says so here - and
 # only guessed at when there is no systemd installed to ask.
 #
-# A build with a prefix of its own keeps the units under that prefix instead.
+# A build with a prefix of its own keeps the units under that prefix instead,
-# systemd searches $(PREFIX)/lib/systemd/user as well, and a file outside the
+# and under share rather than lib. systemd searches both for a system prefix,
-# prefix it was asked for is not this build's to place.
+# but only share for a home one: $XDG_DATA_HOME/systemd/user is a search path
+# and ~/.local/lib/systemd/user is not, so an install into ~/.local that put
+# the units in lib would leave the watcher impossible to enable. That prefix is
+# the one an atomic distribution leaves a user - there is no writing to /usr on
+# Bazzite or Silverblue without layering a package and rebooting.
 ifeq ($(PREFIX),/usr)
 USERUNITDIR  ?= $(shell pkg-config --variable=systemduserunitdir systemd 2>/dev/null || echo /usr/lib/systemd/user)
 else
-USERUNITDIR  ?= $(PREFIX)/lib/systemd/user
+USERUNITDIR  ?= $(DATADIR)/systemd/user
 endif
 
 LINGUAS      := de

README.md

@@ -1,45 +1,9 @@
 # middleclick-autoscroll
 
-Middle-click autoscroll is a CLI for Linux that enables autoscroll in every application that supports it.
+middleclick-autoscroll (what a great name, wow) is a CLI for linux that enables autoscroll in every application that supports it.
-Works with browsers, Electron apps like Discord and Spotify, Steam, and anything else that runs on Chromium under the hood.
+Works with browsers, electron apps like discord and spotify, steam, and anything else that runs on chromium.
 
-There is no app list. My tool just looks at what uses chromium under the hood and applies the necessary steps to get it working.
+This tool looks at which of your apps run chromium under the hood and applies the necessary steps to get autoscrolling working (often just a feature flag). One install, one command and autoscroll _✨just works✨_ (like on windows).
-
-## How to install
-
-**Arch**
-
-```bash
-yay -S middleclick-autoscroll
-```
-
-**Fedora**
-
-```bash
-sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
-  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
-sudo dnf install middleclick-autoscroll
-```
-
-**Debian**
-
-```bash
-sudo install -d -m 0755 /etc/apt/keyrings
-curl -fsSL https://felitendo.github.io/middleclick-autoscroll/KEY.gpg \
-  | sudo gpg --dearmor -o /etc/apt/keyrings/middleclick-autoscroll.gpg
-echo "deb [signed-by=/etc/apt/keyrings/middleclick-autoscroll.gpg] https://felitendo.github.io/middleclick-autoscroll/deb ./" \
-  | sudo tee /etc/apt/sources.list.d/middleclick-autoscroll.list
-sudo apt update && sudo apt install middleclick-autoscroll
-```
-
-**openSUSE**
-
-```bash
-sudo rpm --import https://felitendo.github.io/middleclick-autoscroll/KEY.gpg
-sudo zypper addrepo --gpgcheck --refresh \
-  https://felitendo.github.io/middleclick-autoscroll/rpm middleclick-autoscroll
-sudo zypper install middleclick-autoscroll
-```
 
 ## How to use
 
@@ -54,6 +18,7 @@ Just run `middleclick-autoscroll`. This will open the configuration TUI that loo
   Not identified                 1 - see the applications list
   Steam                          ON
   New applications               ON
+  Middle-click paste             off
   Last applied                   2 minutes ago
 
   Applications pick this up the next time they are started.
@@ -67,9 +32,8 @@ Just run `middleclick-autoscroll`. This will open the configuration TUI that loo
   >
 ```
 
-`[1]` is all you need for the normal case. `[3]` lists every app that was found
+Normally you just need to press `[1]` and the magic is done.
-and what is being done with it, so you can leave a single one out or switch on
+Pressing `[3]` lets you see every app that was found and toggle each one individually. 
-an AppImage that couldn't be identified:
 
 ```
   Applications
@@ -82,59 +46,77 @@ an AppImage that couldn't be identified:
     Slack                              off
     Cursor                             cannot tell
 
-  Anything not identified is left alone until it is turned on here.
   Up/Down select - Space turns one on or off - q goes back
 ```
 
-`[4]` has the same switches per category - browsers, Electron and CEF apps,
+You can also press `[4]` for more settings.
-Flatpaks, snaps, autostart entries, Steam, Spotify - plus a field for extra
+
-Chromium arguments.
+## How to install
+
+**Arch (for the cachyos enjoyers)**
+
+```bash
+yay -S middleclick-autoscroll
+```
+
+**Fedora (for the mentally stable)**
+
+```bash
+sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
+  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
+sudo dnf install middleclick-autoscroll
+```
+
+**Bazzite (for the reboot enjoyers)**
+
+```bash
+sudo curl -fsSL -o /etc/yum.repos.d/middleclick-autoscroll.repo \
+  https://felitendo.github.io/middleclick-autoscroll/middleclick-autoscroll.repo
+sudo rpm-ostree install middleclick-autoscroll
+systemctl reboot
+```
+
+**Debian (for the elderly)**
+
+```bash
+sudo install -d -m 0755 /etc/apt/keyrings
+curl -fsSL https://felitendo.github.io/middleclick-autoscroll/KEY.gpg \
+  | sudo gpg --dearmor -o /etc/apt/keyrings/middleclick-autoscroll.gpg
+echo "deb [signed-by=/etc/apt/keyrings/middleclick-autoscroll.gpg] https://felitendo.github.io/middleclick-autoscroll/deb ./" \
+  | sudo tee /etc/apt/sources.list.d/middleclick-autoscroll.list
+sudo apt update && sudo apt install middleclick-autoscroll
+```
+
+**openSUSE (for the both of you)**
+
+```bash
+sudo rpm --import https://felitendo.github.io/middleclick-autoscroll/KEY.gpg
+sudo zypper addrepo --gpgcheck --refresh \
+  https://felitendo.github.io/middleclick-autoscroll/rpm middleclick-autoscroll
+sudo zypper install middleclick-autoscroll
+```
 
 ## How it works
 
 Blink (the engine in Chromium, Electron, and CEF) already has autoscroll, but
-it's off on Linux because middle click does primary-selection paste there. This
+it's off on Linux by default because middle click normally pastes the clipboard (??).
-flag turns it on:
+This flag turns it on:
 
 --enable-blink-features=MiddleClickAutoscroll
 
 But doing that for every app is kinda bothersome and it also might break with updates.
 That's why I created this small tool to automate that.
 
-Browsers get the same thing asked for differently:
+Browsers get the same thing but this time without "blink":
 
 --enable-features=MiddleClickAutoscroll
 
-Both mean the same feature - Blink generates a matching feature name for each of
+But both do the same ¯\_(ツ)_/¯
-its runtime flags - but the first one is on Chromium's list of flags worth
-warning about, so a browser started with it shows a yellow "unsupported
-command-line flag" bar over every page. The second one is not on that list, so
-there's no bar. It only works from Chromium 124 on, which is why apps that
-embed something older (Steam's CEF, older Electron) keep the first one - they
-have no such bar to begin with. Helium, which carries the feature under its own
-name, is asked for `HeliumMiddleClickAutoscroll` alongside it.
 
 New apps are picked up by a systemd path unit that watches the
-relevant directories. Without systemd, `middleclick-autoscroll apply` does the
+relevant directories. If you hate systemd; `middleclick-autoscroll apply` does the
 same thing manually.
 
-## Steam
-
-Steam's web UI supports autoscroll but has no way to pass extra arguments to its
-helper, so the program patches the script that starts it. Steam checks its own
-files against its manifest - by size and timestamp - and reinstalls the whole
-client package over anything that differs, so the patch is written to look
-unchanged: the bytes the argument costs are taken back out of the script's
-comments and the timestamp is put back.
-
-If that can't be done - a script with no comments left to pay for the argument,
-or one this version doesn't recognise - nothing is written and Steam is left
-alone. A file of the wrong length costs the client package downloaded and
-installed again, and a Steam that quits at the end of it instead of coming up;
-no autoscroll in Steam is the smaller problem. Nothing is added to Steam's
-launcher entry or to the shortcuts it writes for games, and Steam keeps
-repairing its own installation.
-
 ## Commands
 
 | Command | |

doc/middleclick-autoscroll.1.scd

@@ -172,6 +172,35 @@ and has a configuration file with a slot for extra arguments; that slot is
 where the flag goes. Installed as a plain package, a Flatpak or a snap, it is
 an ordinary desktop entry and needs nothing special.
 
+# MIDDLE-CLICK PASTE
+
+Inside a Chromium application the argument settles this on its own: with
+autoscroll on, Blink stops pasting the primary selection on middle click,
+because the button is doing something else now. Everywhere else on the desktop
+middle click goes on pasting, so the desktop's own switch for it is turned off
+too.
+
+KDE has such a switch, and only for a Wayland session, where the paste is a
+protocol the compositor either offers or does not:
+
+	~/.config/kwinrc, [Wayland], EnablePrimarySelection=false
+
+It is written with *kwriteconfig6*, the same tool System Settings uses, because
+kwinrc has a cascade behind it and entries a distribution can mark immutable;
+an edit that reaches past all that writes something KDE goes on to ignore. KWin
+reads the key once, while it starts, so the change is true from the next login
+on rather than straight away.
+
+What the key said before is recorded, and *disable* puts that back. A key that
+already said *false* before any of this is left alone and not recorded either,
+so a paste the user switched off themselves is never switched back on.
+
+On X11 there is nothing to switch. The primary selection is part of X itself
+and every toolkit reaches for it on its own; no one place can say no. The
+status screen leaves the row out where there is nothing to report.
+
+Turn it off under *Settings* to keep the desktop's middle-click paste.
+
 # WHAT CANNOT BE DETECTED
 
 An AppImage keeps its payload in a compressed filesystem, so there is no way to
@@ -190,6 +219,11 @@ _~/.local/state/middleclick-autoscroll/ledger_
 _~/.local/state/middleclick-autoscroll/backup/_
 	Copies of the files that are edited in place rather than shadowed.
 
+_~/.config/kwinrc_
+	KDE's own configuration. One key in it, *EnablePrimarySelection*, is
+	written when the desktop's middle-click paste is turned off, and put
+	back by *disable*.
+
 _~/.cache/middleclick-autoscroll/detect_
 	Which programs were found to be Chromium, keyed by size and modification
 	time. Safe to delete.
@@ -207,7 +241,7 @@ up at the next *apply* rather than on their own.
 
 # SEE ALSO
 
-*systemctl*(1), *flatpak*(1), *snap*(8)
+*systemctl*(1), *flatpak*(1), *snap*(8), *kwriteconfig6*(1)
 
 # AUTHORS
 

po/de.po

@@ -63,6 +63,9 @@ msgstr "%d – siehe Anwendungsliste"
 msgid "Steam"
 msgstr "Steam"
 
+msgid "Middle-click paste"
+msgstr "Mittelklick-Einfügen"
+
 msgid "New applications"
 msgstr "Neue Anwendungen"
 
@@ -112,6 +115,9 @@ msgstr "Programme, die sich beim Anmelden selbst starten"
 msgid "Spotify"
 msgstr "Spotify"
 
+msgid "Turn off KDE's middle-click paste"
+msgstr "KDEs Mittelklick-Einfügen abschalten"
+
 msgid "Apply to newly installed applications"
 msgstr "Auf neu installierte Anwendungen anwenden"
 
@@ -179,6 +185,9 @@ msgstr "Steam startet seine Oberfläche auf eine Art, die diese Version nicht ä
 msgid "Steam's interface cannot be given the flag without leaving a file Steam would reinstall; the change has been taken back."
 msgstr "Steams Oberfläche lässt sich das Flag nicht geben, ohne eine Datei zu hinterlassen, die Steam neu installieren würde; die Änderung wurde zurückgenommen."
 
+msgid "Middle click stops pasting at the next login."
+msgstr "Mittelklick fügt ab der nächsten Anmeldung nichts mehr ein."
+
 
 #. Help
 msgid "Usage: middleclick-autoscroll [command]"

po/middleclick-autoscroll.pot

@@ -63,6 +63,9 @@ msgstr ""
 msgid "Steam"
 msgstr ""
 
+msgid "Middle-click paste"
+msgstr ""
+
 msgid "New applications"
 msgstr ""
 
@@ -112,6 +115,9 @@ msgstr ""
 msgid "Spotify"
 msgstr ""
 
+msgid "Turn off KDE's middle-click paste"
+msgstr ""
+
 msgid "Apply to newly installed applications"
 msgstr ""
 
@@ -179,6 +185,9 @@ msgstr ""
 msgid "Steam's interface cannot be given the flag without leaving a file Steam would reinstall; the change has been taken back."
 msgstr ""
 
+msgid "Middle click stops pasting at the next login."
+msgstr ""
+
 
 #. Help
 msgid "Usage: middleclick-autoscroll [command]"

src/lib/apply.sh

@@ -134,6 +134,11 @@ mca_apply() {
 
 	[[ $CFG_SPOTIFY == yes ]] && mca_spotify_apply
 
+	# Not about any one application: middle click goes on pasting everywhere
+	# else on the desktop, and KDE is the one desktop that can be told not to.
+	# See kde.sh.
+	[[ $CFG_PASTE == yes ]] && mca_kde_paste_apply
+
 	mca_prune_orphans
 
 	if (( MCA_CHANGES )) && mca_have update-desktop-database; then

src/lib/common.sh

@@ -278,9 +278,12 @@ mca_state_write() {
 #   shadow  <generated desktop entry>   <source entry it was generated from>
 #   inplace <edited file>               <basename of its backup copy>
 #   flags   <flag file>                 created | appended | merged
+#   kwin    <kwinrc>                    what EnablePrimarySelection said before
 #
-# `inplace` and `flags` differ in how they are undone: a backup is restored
+# The kinds differ in how they are undone: a backup is restored wholesale, a
-# wholesale, a flag file only loses the one line that was added to it.
+# flag file only loses the one line that was added to it, and kwinrc gets one
+# key written back - it is a file KDE writes to itself, and putting a whole
+# copy of it back would take everything else settled since with it.
 
 mca_ledger_add() {
 	local kind="$1" path="$2" detail="${3:-}"
@@ -303,6 +306,15 @@ mca_ledger_has() {
 	awk -F'\t' -v p="$1" '$2 == p { found = 1 } END { exit !found }' "$MCA_LEDGER"
 }
 
+# mca_ledger_detail <path>
+# The third column of that file's line, empty when the ledger has none. What it
+# means is the kind's business; for `kwin` it is the value to put back.
+mca_ledger_detail() {
+	[[ -f $MCA_LEDGER ]] || return 1
+	awk -F'\t' -v p="$1" '$2 == p { d = $3 } END { if (!length(d)) exit 1; print d }' \
+		"$MCA_LEDGER"
+}
+
 mca_ledger_forget() {
 	local path="$1" tmp
 	[[ -f $MCA_LEDGER ]] || return 0

src/lib/config.sh

@@ -144,6 +144,7 @@ mca_config_load() {
 	CFG_STEAM=no;      mca_config_bool PatchSteam       yes && CFG_STEAM=yes
 	CFG_SPOTIFY=no;    mca_config_bool PatchSpotify     yes && CFG_SPOTIFY=yes
 	CFG_WATCH=no;      mca_config_bool WatchNewApps     yes && CFG_WATCH=yes
+	CFG_PASTE=no;      mca_config_bool DisablePaste     yes && CFG_PASTE=yes
 
 	CFG_EXTRA_FLAGS="$(mca_config_get ExtraFlags '')"
 

src/lib/kde.sh

@@ -0,0 +1,167 @@
+# shellcheck shell=bash
+#
+# KDE's middle-click paste.
+#
+# Inside a Chromium application the flag settles this on its own: with
+# autoscroll on, Blink stops pasting the primary selection on middle click,
+# because the button is doing something else now. Everywhere else on the
+# desktop middle click goes on pasting, which is the behaviour this whole
+# program exists to get away from - so the desktop's own switch for it is
+# turned off too.
+#
+# KWin has such a switch, and only for a Wayland session, where the paste is a
+# protocol the compositor either offers or does not:
+#
+#   ~/.config/kwinrc, [Wayland], EnablePrimarySelection=false
+#
+# On X11 there is nothing to switch. The primary selection is part of X itself
+# and every toolkit reaches for it on its own; no one place can say no.
+#
+# KWin reads the key once, while it starts, so what is written here is true
+# from the next login on rather than straight away.
+
+MCA_KWINRC="${MCA_XDG_CONFIG}/kwinrc"
+MCA_KWIN_GROUP="Wayland"
+MCA_KWIN_KEY="EnablePrimarySelection"
+
+# The kconfig command line tools, whichever generation this session has. They
+# are what System Settings writes kwinrc with, and worth the fork: the file has
+# a cascade behind it - /etc/xdg, the kdedefaults directory - and entries a
+# distribution can mark immutable, and an edit that reaches past all that with
+# sed writes something KDE goes on to ignore.
+MCA_KDE_TOOL=''
+MCA_KDE_TOOL_LOOKED=0
+
+_mca_kde_tool() {
+	local gen
+
+	if (( ! MCA_KDE_TOOL_LOOKED )); then
+		MCA_KDE_TOOL_LOOKED=1
+		for gen in 6 5; do
+			if mca_have "kreadconfig$gen" && mca_have "kwriteconfig$gen"; then
+				MCA_KDE_TOOL="$gen"
+				break
+			fi
+		done
+	fi
+
+	[[ -n $MCA_KDE_TOOL ]] || return 1
+	printf '%s\n' "$MCA_KDE_TOOL"
+}
+
+# mca_kde_session
+# Whether this is a KWin Wayland session.
+mca_kde_session() {
+	local desktop="${XDG_CURRENT_DESKTOP:-}"
+
+	# The watcher is a systemd service, and one started before the session
+	# imported its environment sees none of these variables. A running
+	# kwin_wayland answers both halves of the question at once, and is what
+	# such a run ends up going by.
+	if [[ -z $desktop && -z ${KDE_FULL_SESSION:-} ]]; then
+		mca_have pgrep || return 1
+		pgrep -u "$(id -u)" -x kwin_wayland > /dev/null 2>&1
+		return
+	fi
+
+	# XDG_CURRENT_DESKTOP is the one every desktop sets, and the one to go by
+	# wherever it is set; KDE_FULL_SESSION is what answers when it is not.
+	[[ -z $desktop || ${desktop^^} == *KDE* ]] || return 1
+
+	[[ ${XDG_SESSION_TYPE:-} == wayland || -n ${WAYLAND_DISPLAY:-} ]]
+}
+
+mca_kde_available() {
+	mca_kde_session && _mca_kde_tool > /dev/null
+}
+
+# mca_kde_read [file]
+# What the key says now, lowercased, empty when it is not set at all.
+mca_kde_read() {
+	local file="${1:-$MCA_KWINRC}" gen val
+	gen="$(_mca_kde_tool)" || return 1
+
+	# kreadconfig creates the file it is pointed at, and the status screen -
+	# which asks on every redraw - has no business writing anything. A file
+	# that is not there has no value in it to read anyway.
+	[[ -f $file ]] || return 0
+
+	val="$("kreadconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+		--key "$MCA_KWIN_KEY" 2>/dev/null)"
+	printf '%s\n' "${val,,}"
+}
+
+# mca_kde_write [file] <value>
+# An empty value takes the key back out rather than writing nothing into it -
+# a key that is missing and a key that says nothing are not the same thing to
+# KDE, and only the first one is what an untouched kwinrc looks like.
+mca_kde_write() {
+	local file="$1" value="$2" gen
+	gen="$(_mca_kde_tool)" || return 1
+
+	if [[ -z $value ]]; then
+		"kwriteconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+			--key "$MCA_KWIN_KEY" --delete 2>/dev/null
+	else
+		"kwriteconfig$gen" --file "$file" --group "$MCA_KWIN_GROUP" \
+			--key "$MCA_KWIN_KEY" "$value" 2>/dev/null
+	fi
+}
+
+# mca_kde_paste_apply
+# Turns the paste off, and remembers what the key said before so that undoing
+# puts that back rather than a guess.
+#
+# A key that already says false without the ledger knowing about it was set by
+# the user or by the distribution. That one is left alone and nothing is
+# recorded, so `disable` cannot switch a paste back on that this program never
+# switched off.
+mca_kde_paste_apply() {
+	local current previous changed=0
+
+	mca_kde_available || return 1
+	current="$(mca_kde_read)" || return 1
+
+	if mca_ledger_has "$MCA_KWINRC"; then
+		# Ours already. What goes back is the value recorded the first time
+		# round, not what reading the file now would say - that is false, and
+		# false is what is being undone.
+		previous="$(mca_ledger_detail "$MCA_KWINRC")" || previous=unset
+	elif [[ $current == false ]]; then
+		return 0
+	else
+		previous="${current:-unset}"
+	fi
+
+	if [[ $current != false ]]; then
+		mca_kde_write "$MCA_KWINRC" false || return 1
+		MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+		changed=1
+	fi
+
+	mca_ledger_add kwin "$MCA_KWINRC" "$previous"
+
+	(( changed )) && mca_note "$(mca_msg "Middle click stops pasting at the next login.")"
+	return 0
+}
+
+# mca_kde_paste_revert <file> <previous value>
+mca_kde_paste_revert() {
+	local file="$1" previous="$2"
+
+	_mca_kde_tool > /dev/null || return 1
+	[[ -f $file ]] || return 1
+
+	# Only what is still recognisably ours. A key somebody has since put a
+	# value of their own into is theirs now.
+	[[ "$(mca_kde_read "$file")" == false ]] || return 1
+
+	[[ $previous == unset ]] && previous=''
+	mca_kde_write "$file" "$previous" || return 1
+
+	# Nothing was in the file but the key, which means there was no file before
+	# this program wrote one. An empty kwinrc says nothing that its absence
+	# does not say better.
+	[[ -s $file ]] || rm -f -- "$file"
+	return 0
+}

src/lib/menu.sh

@@ -194,6 +194,18 @@ mca_ui_status() {
 		fi
 	fi
 
+	# Not an ON/OFF like the rows around it: what is being reported is the state
+	# of the paste, not of a switch, and off is the state this program is after.
+	if mca_kde_available; then
+		if [[ "$(mca_kde_read)" == false ]]; then
+			_mca_row "$(mca_msg "Middle-click paste")" \
+				"${MCA_C_GREEN}$(mca_msg "off")${MCA_C_RESET}"
+		else
+			_mca_row "$(mca_msg "Middle-click paste")" \
+				"${MCA_C_DIM}$(mca_msg "on")${MCA_C_RESET}"
+		fi
+	fi
+
 	_mca_row "$(mca_msg "Last applied")" "$(mca_time_ago "$last")"
 
 	if [[ $CFG_ENABLED == yes ]]; then
@@ -216,6 +228,7 @@ MCA_SETTINGS=(
 	"PatchAutostart|bool|yes|Programs that start themselves at login"
 	"PatchSteam|bool|yes|Steam"
 	"PatchSpotify|bool|yes|Spotify"
+	"DisablePaste|bool|yes|Turn off KDE's middle-click paste"
 	"WatchNewApps|bool|yes|Apply to newly installed applications"
 	"ExtraFlags|text||Additional Chromium arguments"
 )

src/lib/patch.sh

@@ -646,6 +646,10 @@ mca_revert_all() {
 				mca_steam_revert "$path" "$detail" \
 					&& MCA_CHANGES=$(( MCA_CHANGES + 1 ))
 				;;
+			kwin)
+				mca_kde_paste_revert "$path" "$detail" \
+					&& MCA_CHANGES=$(( MCA_CHANGES + 1 ))
+				;;
 		esac
 	done < <(tac "$MCA_LEDGER" 2>/dev/null)
 

src/middleclick-autoscroll

@@ -17,7 +17,7 @@ set -uo pipefail
 
 MCA_LIBDIR="${MCA_LIBDIR:-@LIBDIR@}"
 
-for _mod in common config detect patch steam apply menu; do
+for _mod in common config detect patch steam kde apply menu; do
 	# shellcheck source=/dev/null
 	if ! source "$MCA_LIBDIR/$_mod.sh"; then
 		printf 'middleclick-autoscroll: cannot load %s/%s.sh\n' "$MCA_LIBDIR" "$_mod" >&2